-
×
S1P SUEDE BOOT GENES (EU SIZE 43) - VIBG43 QTY: 1 ₵361.00 -
×
CUTTER MATOCK WITH WOODEN HANDLE - VIPPMM QTY: 1 ₵101.00 -
×
SINGLE LEATHER TOOL POUCH - VIBSC QTY: 1 ₵220.00 -
×
DRILLING HAMMER - VIMB1000 QTY: 1 ₵137.00 -
×
PICK HAMMER FIBERGLASS HANDLE - VIPCF QTY: 1 ₵103.00 -
×
WOOD CHISEL MAX-PRO 38MM - VIFMXP38 QTY: 1 ₵113.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 50X150MM - VIG50150 QTY: 1 ₵92.00 -
×
TAPE DISPENSER WITH 2 PACKING TAPES - VICJAF QTY: 1 ₵145.00 -
×
SPRAY ACRYLIC PAINT WHITE - VISABR QTY: 1 ₵55.00 -
×
CUT-RESISTANT GLOVE SUPER 9" - VILAS9 QTY: 1 ₵88.00 -
×
9MMX10MTS FLEXIBLE DRAIN AND WASTE PIPE UNBLOCKER - VIGL10 QTY: 1 ₵197.00 -
×
COMBINATION PLIER 200MM - VIAU200 QTY: 1 ₵120.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 450MM - VISCA450 QTY: 1 ₵127.00 -
×
SMALL VOLTAGE TESTER PRO - VIBPV QTY: 1 ₵32.00 -
×
FLAT PAINT BRUSH 2 1/2" - VITJ212 QTY: 1 ₵59.00 -
×
EARTH CLAMP 500A - VIAM500A QTY: 1 ₵65.00
-
75mm TCT SDS-PLUS CORE DRILL – VIBCP75
₵207.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
INFLATING GUN WITH MANOMETER PRO – VIPEM
₵188.00Add to cartFilling gun with pressure gauge, professional quality and quick fitting.
-
70mm TCT SDS-PLUS CORE DRILL – VIBCP70
₵180.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
65mm TCT SDS-PLUS CORE DRILL – VIBCP65
₵179.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
60mm TCT SDS-PLUS CORE DRILL – VIBCP60
₵170.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
WASHING GUN – VIPLV
₵160.00Add to cart1L Cup capacity, Maximum pressure of 8bar, Air inlet thread 1/4 - 6mm, Quick release-coupling
-
-
50mm TCT SDS-PLUS CORE DRILL – VIBCP50
₵135.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
GLUE GUN 60W – VIPCB60
₵105.00Add to cartPerfect glue gun for basic daily repairs. Being a necessary tool in any workshop, this gun stands out for its 60W power and its short warm-up time of 5 minutes.…
-
STANDARD BLOW GUN (SET 3 NOZZLES) – VIPLP3
₵94.00Add to cartMetal Cleaning Gun - Kit 3 nozzles with a maximum pressure of 10 bar. 3-nozzle kit. Maximum pressure of 10 bar, Air Inlet Connection Thread 1/4 - 6mm, Quick release-coupling
-
HEPA FILTER – VIASL40FH
₵94.00Add to cartHigh quality, effectively filters particles. For vacuuming solids and liquids, compatible with VIASL40.
-
STAINLESS STEEL WELDING ELECTRODE 2,5X300 BL (12 UN) – VIEAI25BL
₵91.00Add to cartSet of 12 Stainless Steel Electrodes 2, 5mm
-
1/4″ SNAP COUPLING WITH FEMALE THREADED JOINT – VIA459
₵89.00Add to cartFemale quick-release snap coupling.
-
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE – VIA458
₵89.00Add to cartSnap coupling with rubber hose sleeve Snap coupling with rubber hose sleeve with quick coupling.
-
12.50MM HSS TWIST DRILL BIT – VIHS12,5
₵74.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.00MM HSS TWIST DRILL BIT – VIHS12
₵72.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
ADJUSTABLE CLEANING AIR BLOW GUN 100MM – VIPLSR100
₵68.00Add to cartMaximum pressure of 10 bar Air Inlet Thread 1/4 - 6mm Quick release-coupling
-
STANDARD AIR GUN
₵68.00Add to cartMetal cleaning air gun with a maximum pressure of 10 bar. Maximum pressure of 10 bar, Air inlet thread 1/4 - 6mm, Quick release-coupling
-
11.50MM HSS TWIST DRILL BIT – VIHS11,5
₵65.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
-
GLUE GUN 10W – VIPCB10
₵65.00Add to cart10 W glue gun, with a working temperature of 170ºC, heat-up period of 5 minutes, 7 mm diameter glue sticks. It also includes 2 glue sticks.
-
11.00MM HSS TWIST DRILL BIT – VIHS11
₵61.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
-
