-
×
HANDSAW CUT-PRO 500MM - VISCP500 QTY: 1 ₵158.00 -
×
MITER BOX WITH BIMATERIA BACK SAW 350MM - VICE350 QTY: 1 ₵215.00 -
×
BACK SAW CUT-PRO 350 MM - VISCCP350 QTY: 1 ₵134.00 -
×
CIRCULAR SAW 1200W 185MM - VISC12185A QTY: 1 ₵836.00 -
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 1 ₵12.00 -
×
ANGLE GRINDER 2600W 230MM - VIRE23026 QTY: 1 ₵1,481.00 -
×
UTILITY KNIFE 18MM SK5 BLADES - VIX18A QTY: 1 ₵73.00 -
×
SET OF 3 WATER SANDPAPER 800 - VILA800BL QTY: 1 ₵33.00 -
×
HIGH TEMPERATURE ACRYLIC ALUMINIUM - VISATAL QTY: 1 ₵73.00 -
×
LARGE VOLTAGE TESTER - VIBPG QTY: 1 ₵32.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
COMBINATION PLIER 200MM - VIAU200 QTY: 1 ₵120.00 -
×
PVC INSULATION TAPE (RED) - VIFI1920VM QTY: 1 ₵21.00 -
×
ACRYLIC FLUORESCENT YELLOW SPRAY - VISAFAM QTY: 1 ₵67.00 -
×
ALUMINIUM RULER 2,5M (10CM) - VIREA25 QTY: 1 ₵278.00 -
×
SET OF 12 PARTICULATE RESPIRATORS WITH VALVE FFP2 - VIC821VC QTY: 1 ₵152.00 -
×
PRESSURE PLIER PRO 175MM - VIAPP7 QTY: 1 ₵202.00 -
×
-
×
BOLT CUTTER PRO 36" - VICVP36 QTY: 1 ₵673.00 -
×
INFLATING GUN WITH MANOMETER PRO - VIPEM QTY: 1 ₵188.00
-
1/2″ AIR RATCHET WRENCH – VICRP12
₵403.00Add to cart1/2 Pneumatic Ratchet Wrench, with a no-load rotation speed of 160rpm, with a maximum torque of 81Nm and a working pressure of 6.3bar. Reversible Rotation Direction. Head Fitting for 1/2…
-
1/4″ LINEAR JOINT WITH MILLED NUTS – VIJD
₵45.00Add to cartLinear joint with milled nuts. Dimensions 1/4 - 6 mm.
-
1/4″ SNAP COUPLING WITH FEMALE THREADED JOINT – VIA459
₵89.00Add to cartFemale quick-release snap coupling.
-
-
10.00MM HSS TWIST DRILL BIT – VIHS10
₵52.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
10.50MM HSS TWIST DRILL BIT – VIHS10,5
₵55.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
100mm TCT SDS-PLUS CORE DRILL – VIBCP100
₵328.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
1050W PERCUSSION DRILL WITH HAMMER MODE (13 MM DRILL CHUCK) – VIBE1050A
₵959.00Add to cart1050W percussion combi drill, with 2 functions and a no-load speed of 0-1000 and 0-2800rpm. High quality percussion combi drill that offers high power thanks to its 1050W. Its two…
-
-
11.00MM HSS TWIST DRILL BIT – VIHS11
₵61.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
11.50MM HSS TWIST DRILL BIT – VIHS11,5
₵65.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.00MM HSS TWIST DRILL BIT – VIHS12
₵72.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.50MM HSS TWIST DRILL BIT – VIHS12,5
₵74.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
1500W PIPE WELDING MACHINE WITH CASE – VIP1500
₵909.00Add to cartThe 1500W VITO’s Pipe welding machine (VIP1500) ensures an excellent performance in PPR pipe welding. LED indication lights (Green/Red); Heating plate with 3 positions (allows up to 3 heating sockets…
-
170A INVERTER WELDER – VII170
₵2,290.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 - 170A), (6.8 kVA/ 20-200A) and (7.8kVA…
-
200A INVERTER WELDER – VII200B
₵2,840.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 - 170A), (6.8 kVA/ 20-200A) and (7.8kVA…
-
20V LI CORDLESS BRUSHLESS COMBI DRILL – VIBCBBSFL20
₵1,021.00Add to cartVITO’s 20V Brushless Combi Drill (VIBCBBSFL20) is suitable for drilling in ceramic, glass, wood, stone and metal. Operation mode selector Speed dial Forward/Reverse button LED Light;
-
50mm TCT SDS-PLUS CORE DRILL – VIBCP50
₵135.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
6-PIECE HOLE SAW SET – VIJ9SC
₵491.00Add to cartSet of HSS bi-metal hole saws, to drill holes in various materials
-
600W DRYWALL SCREWDRIVER – VIBEP
₵834.00Add to cart600W Drywall screwdriver with a no-load rotation speed of 0-2400rpm and maximum screw diameter of 6mm. 600 W of power, reversible direction of rotation, variable speed. It is an effective…
-
60mm TCT SDS-PLUS CORE DRILL – VIBCP60
₵170.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
65mm TCT SDS-PLUS CORE DRILL – VIBCP65
₵179.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE – VIA458
₵89.00Add to cartSnap coupling with rubber hose sleeve Snap coupling with rubber hose sleeve with quick coupling.
-
7.50MM HSS TWIST DRILL BIT – VIHS7,5
₵34.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
