-
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00 -
×
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE - VIA458 QTY: 1 ₵89.00 -
×
S5 PVC SAFETY BOOT (SIZE 38) - VIBAS38 QTY: 1 ₵169.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM - VIG80200 QTY: 1 ₵137.00 -
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 2 ₵12.00 -
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 25MM - VILX25A QTY: 1 ₵58.00 -
×
HIGH PRESSURE WASHER WR3 150B - VIML150WR3 QTY: 1 ₵3,313.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 38) - VIBG38 QTY: 1 ₵361.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
ACRYLIC FADE BLACK SPRAY - VISAPR QTY: 1 ₵55.00 -
×
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE - VIPQ150 QTY: 1 ₵128.00 -
×
SHOE SPIRIT S1P Nº44 - VISSP44 QTY: 1 ₵745.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 46) - VIJCC46 QTY: 1 ₵335.00 -
×
CUT-RESISTANT GLOVE SUPER 9" - VILAS9 QTY: 1 ₵88.00 -
×
PVC INSULATION TAPE (BLUE) - VIFI1920AZ QTY: 1 ₵21.00 -
×
WORKBENCH - VIBTR QTY: 1 ₵5,682.00 -
×
PICK HAMMER WITH WOODEN HANDLE - VIPCM QTY: 1 ₵99.00 -
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 2 ₵239.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00 -
×
-
×
S1P SUEDE BOOT GENES (EU SIZE 44) - VIBG44 QTY: 1 ₵361.00
-
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 1 ₵361.00
-
×
S1P SUEDE BOOT OXIS (EU SIZE 40) - VIBO40 QTY: 1 ₵439.00 -
×
CROBAR 70CM - VIP70 QTY: 1 ₵118.00 -
×
CROSS PEIN HAMMER - VIMP340 QTY: 1 ₵94.00 -
×
S5 PVC SAFETY BOOT (SIZE 42) - VIBAS42 QTY: 1 ₵169.00
-
×
REINFORCED LEATHER GLOVE - VILPPR QTY: 1 ₵47.00 -
×
18 X 300MM POINT CHISEL WITH HAND GUARD - VIPP12 QTY: 1 ₵70.00 -
×
PANORAMIC SAFETY GOGGLES 1128 (PVC FRAME) - VIO1128 QTY: 1 ₵91.00 -
×
ANGLE GRINDER 850W 115MM - VIRE11585A QTY: 1 ₵516.00 -
×
IRON GRINDING DISC 125 - VIRE125 QTY: 1 ₵25.00 -
×
COMBINATION RATCHET SPANNER 19MM - VICCR19 QTY: 1 ₵102.00 -
×
11.00MM HSS TWIST DRILL BIT - VIHS11 QTY: 1 ₵61.00
-
1/2″ AIR RATCHET WRENCH – VICRP12
₵403.00Add to cart1/2 Pneumatic Ratchet Wrench, with a no-load rotation speed of 160rpm, with a maximum torque of 81Nm and a working pressure of 6.3bar. Reversible Rotation Direction. Head Fitting for 1/2…
-
1/4″ LINEAR JOINT WITH MILLED NUTS – VIJD
₵45.00Add to cartLinear joint with milled nuts. Dimensions 1/4 - 6 mm.
-
1/4″ SNAP COUPLING WITH FEMALE THREADED JOINT – VIA459
₵89.00Add to cartFemale quick-release snap coupling.
-
-
10.00MM HSS TWIST DRILL BIT – VIHS10
₵52.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
10.50MM HSS TWIST DRILL BIT – VIHS10,5
₵55.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
100mm TCT SDS-PLUS CORE DRILL – VIBCP100
₵328.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
1050W PERCUSSION DRILL WITH HAMMER MODE (13 MM DRILL CHUCK) – VIBE1050A
₵959.00Add to cart1050W percussion combi drill, with 2 functions and a no-load speed of 0-1000 and 0-2800rpm. High quality percussion combi drill that offers high power thanks to its 1050W. Its two…
-
-
11.00MM HSS TWIST DRILL BIT – VIHS11
₵61.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
11.50MM HSS TWIST DRILL BIT – VIHS11,5
₵65.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.00MM HSS TWIST DRILL BIT – VIHS12
₵72.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.50MM HSS TWIST DRILL BIT – VIHS12,5
₵74.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
1500W PIPE WELDING MACHINE WITH CASE – VIP1500
₵909.00Add to cartThe 1500W VITO’s Pipe welding machine (VIP1500) ensures an excellent performance in PPR pipe welding. LED indication lights (Green/Red); Heating plate with 3 positions (allows up to 3 heating sockets…
-
170A INVERTER WELDER – VII170
₵2,290.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 - 170A), (6.8 kVA/ 20-200A) and (7.8kVA…
-
200A INVERTER WELDER – VII200B
₵2,840.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 - 170A), (6.8 kVA/ 20-200A) and (7.8kVA…
-
20V LI CORDLESS BRUSHLESS COMBI DRILL – VIBCBBSFL20
₵1,021.00Add to cartVITO’s 20V Brushless Combi Drill (VIBCBBSFL20) is suitable for drilling in ceramic, glass, wood, stone and metal. Operation mode selector Speed dial Forward/Reverse button LED Light;
-
50mm TCT SDS-PLUS CORE DRILL – VIBCP50
₵135.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
6-PIECE HOLE SAW SET – VIJ9SC
₵491.00Add to cartSet of HSS bi-metal hole saws, to drill holes in various materials
-
600W DRYWALL SCREWDRIVER – VIBEP
₵834.00Add to cart600W Drywall screwdriver with a no-load rotation speed of 0-2400rpm and maximum screw diameter of 6mm. 600 W of power, reversible direction of rotation, variable speed. It is an effective…
-
60mm TCT SDS-PLUS CORE DRILL – VIBCP60
₵170.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
65mm TCT SDS-PLUS CORE DRILL – VIBCP65
₵179.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE – VIA458
₵89.00Add to cartSnap coupling with rubber hose sleeve Snap coupling with rubber hose sleeve with quick coupling.
-
7.50MM HSS TWIST DRILL BIT – VIHS7,5
₵34.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
