-
×
DIGITAL CALIPER 150MM - VIPQD150 QTY: 1 ₵258.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
M8 SPEED MEASURING TAPE 25 MM X 8 M - VIFM8S QTY: 1 ₵77.00 -
×
CROBAR 40CM - VIP40 QTY: 1 ₵85.00 -
×
-
×
90mm TCT SDS-PLUS CORE DRILL - VIBCP90 QTY: 1 ₵274.00 -
×
SET OF 12 PARTICULATE RESPIRATORS WITH VALVE FFP2 - VIC821VC QTY: 1 ₵152.00 -
×
SQUARE SHOVEL METAL HANDLE - VIPVCF QTY: 1 ₵122.00 -
×
HANDSAW CUT-PRO 550MM - VISCP550 QTY: 1 ₵165.00 -
×
-
×
REINFORCED LEATHER GLOVE - VILPPR QTY: 1 ₵47.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X800MM - VIG80800 QTY: 1 ₵191.00 -
×
ANGLE GRINDER 2200W 230MM - VIRE23022A QTY: 2 ₵1,219.00 -
×
RETRACTABLE KNIFE EXHIBITOR 18MM - VIEX1824A QTY: 1 ₵1,219.00 -
×
HANDSAW CUT-PRO 500MM - VISCP500 QTY: 1 ₵158.00
-
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 44) - VIJCC44 QTY: 1 ₵335.00 -
×
BOLT CUTTER PRO 30" - VICVP30 QTY: 1 ₵544.00 -
×
HANDCART (LARGE WHEEL 400 85LTS) - VICA2 QTY: 1 ₵744.00 -
×
BRASS BRISTLE BRUSH WITH SCRAPER AND HANDLE - VIEACR QTY: 1 ₵59.00 -
×
S5 PVC SAFETY BOOT (SIZE 44) - VIBAS44 QTY: 1 ₵169.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 41) - VIBG41 QTY: 1 ₵361.00 -
×
PROFESSIONAL HACKSAW 550MM - VISC10222 QTY: 1 ₵184.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
WOOD CHISEL MAX-PRO 35MM - VIFMXP35 QTY: 1 ₵109.00 -
×
SELF RETRACTING UTILITY KNIFE 18MM SK5 BLADES - VIX18AA QTY: 1 ₵99.00 -
×
38MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB38 QTY: 1 ₵34.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 42) - VIJCC42 QTY: 1 ₵335.00
-
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 43) - VIBO43 QTY: 2 ₵439.00 -
×
WOOD CHISEL MAX-PRO 8MM - VIFMXP8 QTY: 1 ₵86.00
-
×
PNEUMATIC ANGLE GRINDER 100MM - VIRP100 QTY: 1 ₵748.00 -
×
MITER BOX WITH BIMATERIA BACK SAW 350MM - VICE350 QTY: 1 ₵215.00 -
×
COMBINATION RATCHET SPANNER 10MM - VICCR10 QTY: 1 ₵61.00 -
×
SWIVEL-HEAD RIVETING PLIER - VIARCR QTY: 1 ₵358.00 -
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 1 ₵12.00 -
×
70mm TCT SDS-PLUS CORE DRILL - VIBCP70 QTY: 2 ₵180.00
-
×
SET OF 3 PARTICULATE RESPIRATORS FFP1 - VIC821P1 QTY: 1 ₵46.00 -
×
CUT-RESISTANT GLOVE SUPER 8" - VILAS8 QTY: 1 ₵88.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 38) - VIBO38 QTY: 1 ₵439.00
-
×
-
×
S1P SUEDE BOOT OXIS (EU SIZE 41) - VIBO41 QTY: 1 ₵439.00
-
×
ROUND BRUSH Nº4 - VIPR4 QTY: 1 ₵20.00 -
×
MULTIPURPOSE PVC-DOTTED NON-SLIP GLOVE - VILMA QTY: 2 ₵13.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 450MM - VISCA450 QTY: 1 ₵127.00 -
×
FLAT PAINT BRUSH 2 1/2" - VITJ212 QTY: 1 ₵59.00 -
×
BOLT CUTTER PRO 24" - VICVP24 QTY: 1 ₵354.00 -
×
SLEDGEHAMMER 5KG WITH WOODEN HANDLE - VIM5C QTY: 1 ₵420.00 -
×
SLOTTED SCREWDRIVER PRO - VICFPB65150 QTY: 1 ₵54.00 -
×
-
×
COMBINATION RATCHET SPANNER 7MM - VICCR7 QTY: 1 ₵59.00
-
×
S5 PVC SAFETY BOOT (SIZE 39) - VIBAS39 QTY: 1 ₵169.00
-
×
S1P SUEDE BOOT GENES (EU SIZE 39) - VIBG39 QTY: 1 ₵361.00
-
×
DARK-TINTED LENESES SAFETY SPECTACLES 2172 - VIO2172E QTY: 1 ₵50.00 -
×
ELECTRONICS COMBINATION PLIER - VIAUE130 QTY: 1 ₵59.00 -
×
RED EARMUFF (27dB) - VIP1310 QTY: 1 ₵71.00 -
×
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) - VICCIPB4 QTY: 1 ₵139.00 -
×
75mm TCT SDS-PLUS CORE DRILL - VIBCP75 QTY: 1 ₵207.00
-
×
IRON BAR BENDER 10X12MM (37820) - VICDF1012 QTY: 1 ₵131.00 -
×
WOOD CHISEL MAX-PRO 19MM - VIFMXP19 QTY: 1 ₵93.00
-
×
RIVETING PLIER - VIAREB QTY: 1 ₵151.00 -
×
S5 PVC SAFETY BOOT (SIZE 43) - VIBAS43 QTY: 1 ₵169.00
-
×
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM - VIG80200 QTY: 1 ₵137.00
-
×
FAST CHARGER 20V - VIBCCR20 QTY: 1 ₵305.00
-
1/2″ AIR RATCHET WRENCH – VICRP12
₵403.00Add to cart1/2 Pneumatic Ratchet Wrench, with a no-load rotation speed of 160rpm, with a maximum torque of 81Nm and a working pressure of 6.3bar. Reversible Rotation Direction. Head Fitting for 1/2…
-
1/4″ LINEAR JOINT WITH MILLED NUTS – VIJD
₵45.00Add to cartLinear joint with milled nuts. Dimensions 1/4 - 6 mm.
-
1/4″ SNAP COUPLING WITH FEMALE THREADED JOINT – VIA459
₵89.00Add to cartFemale quick-release snap coupling.
-
-
10.00MM HSS TWIST DRILL BIT – VIHS10
₵52.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
10.50MM HSS TWIST DRILL BIT – VIHS10,5
₵55.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
100mm TCT SDS-PLUS CORE DRILL – VIBCP100
₵328.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
1050W PERCUSSION DRILL WITH HAMMER MODE (13 MM DRILL CHUCK) – VIBE1050A
₵959.00Add to cart1050W percussion combi drill, with 2 functions and a no-load speed of 0-1000 and 0-2800rpm. High quality percussion combi drill that offers high power thanks to its 1050W. Its two…
-
-
11.00MM HSS TWIST DRILL BIT – VIHS11
₵61.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
11.50MM HSS TWIST DRILL BIT – VIHS11,5
₵65.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.00MM HSS TWIST DRILL BIT – VIHS12
₵72.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
12.50MM HSS TWIST DRILL BIT – VIHS12,5
₵74.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
-
1500W PIPE WELDING MACHINE WITH CASE – VIP1500
₵909.00Add to cartThe 1500W VITO’s Pipe welding machine (VIP1500) ensures an excellent performance in PPR pipe welding. LED indication lights (Green/Red); Heating plate with 3 positions (allows up to 3 heating sockets…
-
170A INVERTER WELDER – VII170
₵2,290.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 - 170A), (6.8 kVA/ 20-200A) and (7.8kVA…
-
200A INVERTER WELDER – VII200B
₵2,840.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 - 170A), (6.8 kVA/ 20-200A) and (7.8kVA…
-
20V LI CORDLESS BRUSHLESS COMBI DRILL – VIBCBBSFL20
₵1,021.00Add to cartVITO’s 20V Brushless Combi Drill (VIBCBBSFL20) is suitable for drilling in ceramic, glass, wood, stone and metal. Operation mode selector Speed dial Forward/Reverse button LED Light;
-
50mm TCT SDS-PLUS CORE DRILL – VIBCP50
₵135.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
6-PIECE HOLE SAW SET – VIJ9SC
₵491.00Add to cartSet of HSS bi-metal hole saws, to drill holes in various materials
-
600W DRYWALL SCREWDRIVER – VIBEP
₵834.00Add to cart600W Drywall screwdriver with a no-load rotation speed of 0-2400rpm and maximum screw diameter of 6mm. 600 W of power, reversible direction of rotation, variable speed. It is an effective…
-
60mm TCT SDS-PLUS CORE DRILL – VIBCP60
₵170.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
65mm TCT SDS-PLUS CORE DRILL – VIBCP65
₵179.00Add to cartTCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long. This core drill bit is used for drilling 30mm diameter holes in stone.…
-
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE – VIA458
₵89.00Add to cartSnap coupling with rubber hose sleeve Snap coupling with rubber hose sleeve with quick coupling.
-
7.50MM HSS TWIST DRILL BIT – VIHS7,5
₵34.00Add to cartSuitable for small holes, on metal, this set of 2 drill bits is made of HSS steel, i.e. in high-speed steel with different layers and compositions. Diameter 2 mm and…
