-
×
PVC INSULATION TAPE (BLACK) - VIFI1920P QTY: 1 ₵21.00 -
×
MAGNETIC ALUMINIUM LEVEL PRO 120CM - VINP120 QTY: 1 ₵322.00 -
×
HAND PALLET TRUCK 2,5 T - VIPP25 QTY: 1 ₵4,477.00 -
×
PICK HAMMER WITH WOODEN HANDLE - VIPCM QTY: 1 ₵99.00 -
×
12.00MM HSS TWIST DRILL BIT - VIHS12 QTY: 2 ₵72.00 -
×
ANGLE GRINDER 2600W 230MM - VIRE23026 QTY: 1 ₵1,481.00 -
×
MANUAL PIPE THREADER FOR PVC PIPE - VITA12 QTY: 1 ₵126.00 -
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 1 ₵21.00 -
×
FLAT BASTARD CUT FILE 6" BLISTER - VILCB6 QTY: 1 ₵40.00 -
×
TRY SQUARE 250MM - VIEC250 QTY: 1 ₵124.00 -
×
ANGLE GRINDER 2200W 230MM - VIRE23022A QTY: 1 ₵1,219.00 -
×
HANDCART (LARGE WHEEL 400 85LTS) - VICA2 QTY: 1 ₵744.00 -
×
10MM WOOD SPADE - VIPUA10 QTY: 1 ₵25.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 1 ₵361.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
-
×
70mm TCT SDS-PLUS CORE DRILL - VIBCP70 QTY: 1 ₵180.00 -
×
COMBINATION RATCHET SPANNER 19MM - VICCR19 QTY: 1 ₵102.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 45) - VIBO45 QTY: 1 ₵439.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 44) - VIBG44 QTY: 1 ₵361.00
-
×
200A INVERTER WELDER - VII200B QTY: 1 ₵2,840.00 -
×
PRESS DRILL 500 W - VIMFC500A QTY: 1 ₵2,344.00 -
×
18 X 250MM FLAT CHISEL WITH HAND GUARD - VITP10 QTY: 2 ₵70.00 -
×
PANORAMIC SAFETY GOGGLES 1128 (PVC FRAME) - VIO1128 QTY: 1 ₵91.00 -
×
WELDING GLOVE 40CM - VILS40 QTY: 1 ₵120.00 -
×
BENCH VICE - VITB150 QTY: 1 ₵1,111.00 -
×
ROUND BRUSH Nº4 - VIPR4 QTY: 1 ₵20.00 -
×
SLOTTED PARALLEL SCREWDRIVER PRO - VICFPPB375 QTY: 1 ₵42.00 -
×
SET OF 3 WATER SANDPAPER 800 - VILA800BL QTY: 1 ₵33.00 -
×
11.00MM HSS TWIST DRILL BIT - VIHS11 QTY: 2 ₵61.00
-
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 1 ₵12.00 -
×
SET OF 3 WATER SANDPAPER 600 - VILA600BL QTY: 1 ₵33.00
-
×
WOOD CHISEL MAX-PRO 8MM - VIFMXP8 QTY: 1 ₵86.00 -
×
PADLOCK 70MM - VIAQ70 QTY: 1 ₵262.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00
-
×
BALL PEIN HAMMER - VIB300 QTY: 1 ₵108.00 -
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
8.50MM HSS TWIST DRILL BIT - VIHS8,5 QTY: 1 ₵40.00
-
×
ADJUSTABLE CLEANING AIR BLOW GUN 100MM - VIPLSR100 QTY: 1 ₵68.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 1 ₵588.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 43) - VIBO43 QTY: 1 ₵439.00
-
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
COMBINATION RATCHET SPANNER 21MM - VICCR21 QTY: 1 ₵129.00
-
×
125MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB125 QTY: 1 ₵45.00 -
×
PVC INSULATION TAPE (RED) - VIFI1920VM QTY: 1 ₵21.00 -
×
BOLT CUTTER PRO 24" - VICVP24 QTY: 1 ₵354.00 -
×
WOOD CHISEL MAX-PRO 6MM - VIFMXP6 QTY: 1 ₵86.00
-
×
BELT SANDER 900W - VILR900 QTY: 1 ₵760.00 -
×
TRY SQUARE 350MM - VIEC350 QTY: 1 ₵140.00
-
×
SQUARE SMOOTH CUT FILE 6" BLISTER - VILQM6 QTY: 1 ₵58.00 -
×
PLUNGE ROUTER 1200 W (8MM) - VIT1200 QTY: 1 ₵960.00 -
×
DOUBLE LEATHER TOOL POUCH - VIBDC QTY: 1 ₵397.00 -
×
HANDSAW CUT-PRO 500MM - VISCP500 QTY: 1 ₵158.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
HEAD WELDING HELMET - VIMSC QTY: 1 ₵139.00 -
×
BOLT CUTTER PRO 30" - VICVP30 QTY: 1 ₵544.00 -
×
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
