-
×
MANUAL PIPE THREADER FOR PVC PIPE - VITA34 QTY: 1 ₵132.00 -
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 18MM - VILX18A QTY: 1 ₵31.00 -
×
MULTIPURPOSE PVC-DOTTED NON-SLIP GLOVE - VILMA QTY: 1 ₵13.00 -
×
DISPOSABLE POLYPROPYLENE COVERALL - VIFDL QTY: 1 ₵55.00 -
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 1 ₵239.00 -
×
NITRILE-COATED GLOVE 9" - VILN9 QTY: 1 ₵12.00 -
×
7.50MM HSS TWIST DRILL BIT - VIHS7,5 QTY: 1 ₵34.00 -
×
RED EARMUFF (27dB) - VIP1310 QTY: 2 ₵71.00 -
×
FLAT PAINT BRUSH 1/2" - VITJ12 QTY: 2 ₵23.00 -
×
-
×
12/24 V BATTERY CHARGER - VICB16S QTY: 1 ₵909.00 -
×
HEAD WELDING HELMET - VIMSC QTY: 2 ₵139.00 -
×
PVC INSULATION TAPE (WHITE) - VIFI1920B QTY: 1 ₵21.00 -
×
100MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB100 QTY: 1 ₵41.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 45) - VIBG45 QTY: 1 ₵361.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00
-
×
CUT-RESISTANT GLOVE SUPER 9" - VILAS9 QTY: 1 ₵88.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 42) - VIJCC42 QTY: 1 ₵335.00 -
×
PROFESSIONAL RIVETING PLIER - VIARPR QTY: 1 ₵242.00 -
×
-
×
HANDSAW CUT-PRO 550MM - VISCP550 QTY: 2 ₵165.00 -
×
PU EAR PLUG (100 PCS) - VIP1374A QTY: 1 ₵257.00 -
×
CORDED EAR PLUG (25dB) - VIP1363 QTY: 1 ₵29.00 -
×
IRON CUTTING DISC 230MM - VICF230 QTY: 1 ₵25.00 -
×
PICK HAMMER WITH WOODEN HANDLE - VIPCM QTY: 1 ₵99.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 46) - VIBG46 QTY: 1 ₵361.00
-
×
S1P SUEDE BOOT GENES (EU SIZE 44) - VIBG44 QTY: 1 ₵361.00
-
×
SLOTTED PARALLEL SCREWDRIVER PRO - VICFPPB375 QTY: 1 ₵42.00 -
×
PANORAMIC SAFETY GOGGLES 1128 (PVC FRAME) - VIO1128 QTY: 1 ₵91.00 -
×
HANDSAW CUT-PRO 500MM - VISCP500 QTY: 1 ₵158.00
-
×
CUT-RESISTANT GLOVE SUPER 8" - VILAS8 QTY: 2 ₵88.00
-
×
S1P SUEDE BOOT GENES (EU SIZE 38) - VIBG38 QTY: 1 ₵361.00
-
×
BATTERY 20V LI 4AH - VIBCBL204 QTY: 1 ₵651.00 -
×
DEMOLITION HAMMER 1700 W - VIMD1700 QTY: 1 ₵3,782.00 -
×
DARK GLASS FOR HAND-HELD WELDING MASK - VIVMSE QTY: 1 ₵32.00 -
×
NITRILE-COATED GLOVE 7" - VILN7 QTY: 2 ₵12.00
-
×
ACRILIC VARNISH SPRAY - VISAV QTY: 1 ₵55.00 -
×
-
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
10.00MM HSS TWIST DRILL BIT - VIHS10 QTY: 1 ₵52.00
-
×
SET OF 3 WATER SANDPAPER 100 - VILA100BL QTY: 1 ₵35.00 -
×
DISPOSABLE COVERALL CAT. 3 / TYPE 5-6 - VIFDPPL QTY: 1 ₵69.00 -
×
BACK SAW CUT-PRO 350 MM - VISCCP350 QTY: 1 ₵134.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 38) - VIBO38 QTY: 1 ₵439.00 -
×
HAND PALLET TRUCK 2,5 T - VIPP25 QTY: 1 ₵4,477.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
S5 PVC SAFETY BOOT (SIZE 39) - VIBAS39 QTY: 1 ₵169.00 -
×
S5 PVC SAFETY BOOT (SIZE 45) - VIBAS45 QTY: 1 ₵169.00
-
×
CROBAR 80CM - VIP80 QTY: 1 ₵131.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
