-
×
SOLID 1 PIECE HAMMER BIMATERIAL HANDLE - VIMM QTY: 1 ₵217.00 -
×
CARPENTER PINCER 180MM - VITC180 QTY: 1 ₵76.00 -
×
PICKAXE WITH WOODEN HANDLE - VIPPBM QTY: 1 ₵101.00 -
×
BALL PEIN HAMMER - VIB300 QTY: 1 ₵108.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 120X300MM - VIG120300 QTY: 1 ₵223.00 -
×
GRAVITY FEED SPRAY GUN - VIA1862 QTY: 1 ₵290.00 -
×
SWIVEL-HEAD RIVETING PLIER - VIARCR QTY: 1 ₵358.00 -
×
6/12V 7A BATTERY CHARGER - VICB10E QTY: 1 ₵607.00 -
×
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) - VICCIPB4 QTY: 1 ₵139.00 -
×
8-STEP ALUMINIUM STEP LADDER - VIEAC8 QTY: 1 ₵979.00 -
×
ALUMINIUM RULER 2,5M (10CM) - VIREA25 QTY: 1 ₵278.00 -
×
METAL GRINDING DISC 180 - VIRE180 QTY: 2 ₵43.00 -
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 18MM - VILX18A QTY: 1 ₵31.00 -
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 9MM - VILX9A QTY: 1 ₵22.00
-
×
11.00MM HSS TWIST DRILL BIT - VIHS11 QTY: 1 ₵61.00 -
×
75MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB75 QTY: 1 ₵39.00 -
×
TRY SQUARE 300MM - VIEC300 QTY: 1 ₵132.00 -
×
COMBINATION PLIER 200MM - VIAU200 QTY: 1 ₵120.00 -
×
BLADE FOR BUTCHER SAW - VIFST QTY: 1 ₵50.00 -
×
THIN DOUBLE-SIDED TAPE 50 MM X 20M - VIFBA5020 QTY: 1 ₵63.00 -
×
HIGH PRESSURE WASHER WR3 150B - VIML150WR3 QTY: 1 ₵3,313.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
MX8 SPEED MEASURING TAPE 25 MM X 8 M - VIFMX8S QTY: 1 ₵92.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 2 ₵135.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
BOLT CUTTER PRO 36" - VICVP36 QTY: 1 ₵673.00 -
×
DISPOSABLE COVERALL CAT. 3 / TYPE 5-6 - VIFDPPL QTY: 2 ₵69.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 45) - VIBO45 QTY: 1 ₵439.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
CROSS PEIN HAMMER - VIMP340 QTY: 1 ₵94.00 -
×
PROFESSIONAL RIVETING PLIER - VIARPR QTY: 1 ₵242.00 -
×
BRUSHLESS COMBI DRILL 20V + BMC CASE + CHARGER - VIBCBBBMCC QTY: 1 ₵1,244.00 -
×
CROBAR 50CM - VIP50 QTY: 1 ₵99.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 40) - VIBO40 QTY: 1 ₵439.00
-
×
-
×
-
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 1 ₵239.00 -
×
CUTTER MATOCK HAMMER FIBERGLASS HANDLE - VIPPMF QTY: 1 ₵101.00 -
×
DISPOSABLE COVERALL CAT. 3 / TYPE 5-6 - VIFDPPXL QTY: 1 ₵69.00
-
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
CROBAR 70CM - VIP70 QTY: 1 ₵118.00
-
×
COMBINATION RATCHET SPANNER 17MM - VICCR17 QTY: 1 ₵93.00 -
×
STANDARD AIR GUN QTY: 1 ₵68.00 -
×
S5 PVC SAFETY BOOT (SIZE 43) - VIBAS43 QTY: 1 ₵169.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 50X250MM - VIG50250 QTY: 1 ₵96.00
-
×
CROBAR 80CM - VIP80 QTY: 1 ₵131.00
-
×
PVC TRAFFIC CONE 30X50CM - VICS QTY: 1 ₵175.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 37) - VIBG37 QTY: 1 ₵361.00 -
×
WOOD CHISEL MAX-PRO 6MM - VIFMXP6 QTY: 1 ₵86.00 -
×
WOOD CHISEL MAX-PRO 16MM - VIFMXP16 QTY: 1 ₵90.00
-
×
STILLSON-TYPE PIPE WRENCH 12" - VICHST12 QTY: 1 ₵158.00 -
×
IRON GRINDING DISC 230 - VIRE230 QTY: 1 ₵56.00 -
×
SLOTTED SCREWDRIVER PRO - VICFPB8150 QTY: 1 ₵62.00 -
×
REINFORCED LEATHER GLOVE - VILPPR QTY: 1 ₵47.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 42) - VIBG42 QTY: 1 ₵361.00
-
×
9MMX5MTS FLEXIBLE DRAIN AND WASTE PIPE UNBLOCKER - VIGL5 QTY: 1 ₵136.00 -
×
BRASS BRISTLE BRUSH WITH SCRAPER AND HANDLE - VIEACR QTY: 1 ₵59.00 -
×
10 MTS SPIRAL AIR HOSE - VIME QTY: 1 ₵150.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 37) - VIBO37 QTY: 1 ₵439.00
-
×
CLAW HAMMER 29MM - VIMC29 QTY: 1 ₵128.00 -
×
COMBINATION SCREWDRIVER/PHILLIPS PRO - VICCFPB QTY: 1 ₵73.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 120X1000MM - VIG1201000 QTY: 1 ₵321.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
