-
×
SET OF 12 COMBINATION RATCHET SPANNERS - VIJCCR12 QTY: 1 ₵537.00 -
×
HANDCART (PNEUMATIC WHEEL DISASSEMBLED) - VICAD12 QTY: 1 ₵755.00 -
×
FLAT BASTARD CUT FILE 8" BLISTER - VILCB8 QTY: 1 ₵49.00 -
×
STILLSON-TYPE PIPE WRENCH 8" - VICHST8 QTY: 1 ₵83.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 500MM - VISCA500 QTY: 1 ₵138.00 -
×
BLACK IRON SQUARE 400X600MM - VIEP QTY: 1 ₵80.00 -
×
BLACK RUBBER MALLET 250G - VIMBP250 QTY: 1 ₵74.00 -
×
CROBAR 60CM - VIP60 QTY: 1 ₵111.00 -
×
COMBINATION RATCHET SPANNER 6MM - VICCR6 QTY: 1 ₵57.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
8.50MM HSS TWIST DRILL BIT - VIHS8,5 QTY: 1 ₵40.00 -
×
BOLT CUTTER PRO 24" - VICVP24 QTY: 1 ₵354.00 -
×
PVC INSULATION TAPE (YELLOW) - VIFI1920A QTY: 1 ₵21.00 -
×
200A INVERTER WELDER - VII200B QTY: 1 ₵2,840.00 -
×
-
×
F-CLAMP WITH BIMATERIAL HANDLE 80X800MM - VIG80800 QTY: 1 ₵191.00 -
×
20V LI CORDLESS BRUSHLESS COMBI DRILL - VIBCBBSFL20 QTY: 1 ₵1,021.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 48) - VIJCC48 QTY: 1 ₵335.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 2 ₵588.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 41) - VIBG41 QTY: 1 ₵361.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00
-
×
HANDSAW CUT-PRO 550MM - VISCP550 QTY: 1 ₵165.00 -
×
STILLSON-TYPE PIPE WRENCH 12" - VICHST12 QTY: 1 ₵158.00
-
×
WOOD CHISEL MAX-PRO 16MM - VIFMXP16 QTY: 1 ₵90.00 -
×
COMBINATION RATCHET SPANNER 7MM - VICCR7 QTY: 1 ₵59.00
-
×
WOOD CHISEL MAX-PRO 8MM - VIFMXP8 QTY: 1 ₵86.00
-
×
-
×
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM - VIG80500 QTY: 1 ₵159.00
-
×
COMBINATION PLIER 175MM - VIAU175 QTY: 2 ₵112.00 -
×
SMALL VOLTAGE TESTER PRO - VIBPV QTY: 1 ₵32.00 -
×
HALF ROUND SMOOTH CUT FILE 6" BLISTER - VILMCM6 QTY: 1 ₵58.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 1 ₵361.00
-
×
POLISHER 1200W - VIP1200A QTY: 1 ₵838.00 -
×
CROBAR 70CM - VIP70 QTY: 1 ₵118.00
-
×
-
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
