-
×
MOULD FORGED CROSS HAMMER - VIMTM1000 QTY: 1 ₵130.00 -
×
90mm TCT SDS-PLUS CORE DRILL - VIBCP90 QTY: 1 ₵274.00 -
×
BLACK IRON SQUARE 400X600MM - VIEP QTY: 1 ₵80.00 -
×
PACKING TAPE 50MMX66MTS - VIFE6650T QTY: 1 ₵36.00 -
×
18 X 300MM FLAT CHISEL WITH HAND GUARD - VITP12 QTY: 1 ₵72.00 -
×
SMALL VOLTAGE TESTER PRO - VIBPV QTY: 1 ₵32.00 -
×
PADLOCK 70MM - VIAQ70 QTY: 1 ₵262.00 -
×
8.00MM HSS TWIST DRILL BIT - VIHS8 QTY: 1 ₵37.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 45) - VIBG45 QTY: 1 ₵361.00 -
×
COMBINATION RATCHET SPANNER 15MM - VICCR15 QTY: 1 ₵80.00 -
×
-
×
10 MTS SPIRAL AIR HOSE - VIME QTY: 1 ₵150.00 -
×
COMBINATION PLIER 200MM - VIAU200 QTY: 1 ₵120.00 -
×
38MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB38 QTY: 1 ₵34.00 -
×
SET OF 3 WATER SANDPAPER 600 - VILA600BL QTY: 1 ₵33.00 -
×
9.00MM HSS TWIST DRILL BIT - VIHS9 QTY: 1 ₵45.00
-
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 2 ₵89.00 -
×
125MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB125 QTY: 2 ₵45.00
-
×
COMBINATION RATCHET SPANNER 22MM - VICCR22 QTY: 1 ₵144.00
-
×
JIGSAW 570 W - VITIC570 QTY: 1 ₵520.00 -
×
18 X 250MM FLAT CHISEL WITH HAND GUARD - VITP10 QTY: 1 ₵70.00
-
×
BACK SAW WITH BI-MATERIAL HANDLE 300MM - VISCO300 QTY: 1 ₵121.00 -
×
CROBAR 100CM - VIP100 QTY: 1 ₵168.00 -
×
SET OF 2 FILTER REFILLS 757/762 A1 - VIF757 QTY: 1 ₵178.00 -
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 1 ₵21.00 -
×
-
×
PVC INSULATION TAPE (RED) - VIFI1920VM QTY: 1 ₵21.00 -
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 1 ₵239.00 -
×
HIGH TEMPERATURE ACRYLIC BLACK - VISATPR QTY: 1 ₵73.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
WORKBENCH - VIBTR QTY: 1 ₵5,682.00 -
×
FIXED HAND TROLLEY - VICA7 QTY: 1 ₵641.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 37) - VIBG37 QTY: 1 ₵361.00
-
×
HANDSAW CUT-PRO 550MM - VISCP550 QTY: 1 ₵165.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
