-
×
IRON CUTTING DISC 230MM - VICF230 QTY: 1 ₵25.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
8-STEP ALUMINIUM STEP LADDER - VIEAC8 QTY: 1 ₵979.00 -
×
-
×
HIGH TEMPERATURE ACRYLIC ALUMINIUM - VISATAL QTY: 1 ₵73.00 -
×
80mm TCT SDS-PLUS CORE DRILL - VIBCP80 QTY: 2 ₵225.00 -
×
BATTERY 20V LI 4AH - VIBCBL204 QTY: 1 ₵651.00 -
×
COMBINATION RATCHET SPANNER 22MM - VICCR22 QTY: 1 ₵144.00 -
×
20V LI CORDLESS BRUSHLESS COMBI DRILL - VIBCBBSFL20 QTY: 1 ₵1,021.00 -
×
8-PIECE AIR TOOL KIT - VIKITCO8 QTY: 1 ₵471.00 -
×
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE - VIA458 QTY: 1 ₵89.00 -
×
-
×
6MMX3MTS FLEXIBLE DRAIN AND WASTE PIPE UNBLOCKER - VIGL3 QTY: 1 ₵88.00 -
×
HIGH PRESSURE WASHER WR3 150B - VIML150WR3 QTY: 1 ₵3,313.00 -
×
ACRYLIC COPPER SPRAY - VISACO QTY: 1 ₵63.00 -
×
SOLID 1 PIECE HAMMER BIMATERIAL HANDLE - VIMM QTY: 1 ₵217.00 -
×
100mm TCT SDS-PLUS CORE DRILL - VIBCP100 QTY: 1 ₵328.00
-
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 1 ₵21.00 -
×
ANGLE GRINDER 2600W 230MM - VIRE23026 QTY: 1 ₵1,481.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 120X500MM - VIG120500 QTY: 1 ₵249.00 -
×
ROUND WOOD RASP 8" - VIGC8 QTY: 1 ₵64.00 -
×
EXTERNAL CIRCLIPS PLIER 170MM - VIAFE150 QTY: 1 ₵85.00 -
×
-
×
FLAT PAINT BRUSH 1" - VITJ1 QTY: 1 ₵26.00 -
×
SET OF 2 FILTERS A1P3 - VIF757A1P3 QTY: 1 ₵214.00 -
×
SHOE SPIRIT S1P Nº44 - VISSP44 QTY: 1 ₵745.00 -
×
18 X 250MM FLAT CHISEL WITH HAND GUARD - VITP10 QTY: 1 ₵70.00 -
×
BLACK RUBBER MALLET 450G - VIMBP450 QTY: 1 ₵74.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 44) - VIBO44 QTY: 1 ₵439.00 -
×
-
×
-
×
IRON BAR BENDER 6X8MM (37800) - VICDF68 QTY: 1 ₵106.00 -
×
PRESS DRILL 500 W - VIMFC500A QTY: 1 ₵2,344.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 550MM - VISCA550 QTY: 1 ₵149.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
