-
×
-
×
HALF ROUND SMOOTH CUT FILE 6" BLISTER - VILMCM6 QTY: 2 ₵58.00 -
×
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE - VIPQ150 QTY: 1 ₵128.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
TAPE DISPENSER WITH 2 PACKING TAPES - VICJAF QTY: 2 ₵145.00 -
×
ELECTRONICS COMBINATION PLIER - VIAUE130 QTY: 1 ₵59.00 -
×
SLOTTED PARALLEL SCREWDRIVER PRO - VICFPPB375 QTY: 1 ₵42.00 -
×
DOUBLE LEATHER TOOL POUCH - VIBDC QTY: 2 ₵397.00 -
×
SHOE SPIRIT S1P Nº43 - VISSP43 QTY: 1 ₵826.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
25MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB25 QTY: 1 ₵31.00 -
×
SQUARE SHOVEL METAL HANDLE - VIPVCF QTY: 1 ₵122.00 -
×
SET OF 3 WATER SANDPAPER 600 - VILA600BL QTY: 1 ₵33.00 -
×
PICK HAMMER FIBERGLASS HANDLE - VIPCF QTY: 1 ₵103.00 -
×
MULTIPURPOSE PVC-DOTTED NON-SLIP GLOVE - VILMA QTY: 1 ₵13.00 -
×
ANGLE GRINDER 2200W 230MM - VIRE23022A QTY: 1 ₵1,219.00 -
×
-
×
INTERNAL CIRCLIPS PLIER 150MM - VIAFI150 QTY: 1 ₵85.00 -
×
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE - VIA458 QTY: 1 ₵89.00 -
×
WOOD CHISEL MAX-PRO 16MM - VIFMXP16 QTY: 1 ₵90.00 -
×
ACRYLIC FLUORESCENT YELLOW SPRAY - VISAFAM QTY: 1 ₵67.00 -
×
CROBAR 60CM - VIP60 QTY: 1 ₵111.00 -
×
-
×
BLACK RUBBER MALLET 450G - VIMBP450 QTY: 1 ₵74.00 -
×
-
×
JIGSAW 750 W - VITIC750 QTY: 1 ₵636.00 -
×
PU EAR PLUG (100 PCS) - VIP1374A QTY: 1 ₵257.00 -
×
ADJUSTABLE WRENCH PRO 375MM - VICIP15 QTY: 1 ₵254.00 -
×
COMBINATION RATCHET SPANNER 18MM - VICCR18 QTY: 1 ₵96.00 -
×
WORKBENCH - VIBTR QTY: 1 ₵5,682.00 -
×
SET OF 3 WATER SANDPAPER 800 - VILA800BL QTY: 1 ₵33.00
-
×
SMALL VOLTAGE TESTER PRO - VIBPV QTY: 1 ₵32.00 -
×
EARTH CLAMP 500A - VIAM500A QTY: 1 ₵65.00 -
×
20V LI CORDLESS BRUSHLESS COMBI DRILL - VIBCBBSFL20 QTY: 1 ₵1,021.00 -
×
CROSS PEIN HAMMER - VIMP340 QTY: 1 ₵94.00 -
×
-
×
BENCH VICE - VITB150 QTY: 1 ₵1,111.00 -
×
NITRILE-COATED GLOVE 9" - VILN9 QTY: 1 ₵12.00 -
×
MT LONG MEASURING TAPE 13 MM X 50 M - VIFMT50 QTY: 1 ₵171.00 -
×
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE - VIMB1250 QTY: 1 ₵161.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 39) - VIBG39 QTY: 1 ₵361.00 -
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 1 ₵21.00 -
×
COMBINATION RATCHET SPANNER 19MM - VICCR19 QTY: 1 ₵102.00
-
×
HANDCART (PNEUMATIC WHEEL DISASSEMBLED) - VICAD12 QTY: 1 ₵755.00 -
×
AJUSTABLE HACKSAW FOR METAL 300MM - VISCFE QTY: 1 ₵55.00 -
×
WOOD CHISEL MAX-PRO 28MM - VIFMXP28 QTY: 1 ₵104.00
-
×
BOLT CUTTER PRO 14" - VICVP14 QTY: 1 ₵189.00 -
×
FLAT BASTARD CUT FILE 8" BLISTER - VILCB8 QTY: 1 ₵49.00 -
×
-
×
DRYWALL SANDER 800 W - VILG800 QTY: 1 ₵1,211.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 550MM - VISCA550 QTY: 1 ₵149.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
