-
×
50MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB50 QTY: 1 ₵36.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 37) - VIBG37 QTY: 1 ₵361.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 550MM - VISCA550 QTY: 1 ₵149.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 44) - VIJCC44 QTY: 1 ₵335.00 -
×
MX8 SPEED MEASURING TAPE 25 MM X 8 M - VIFMX8S QTY: 1 ₵92.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00 -
×
SLOTTED PARALLEL SCREWDRIVER PRO - VICFPPB375 QTY: 1 ₵42.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 450MM - VISCA450 QTY: 2 ₵127.00
-
×
HALF FACE MASK 757 2 FILTERS - VIM757 QTY: 1 ₵239.00 -
×
S5 PVC SAFETY BOOT (SIZE 43) - VIBAS43 QTY: 1 ₵169.00 -
×
-
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 1 ₵361.00
-
×
PACKING TAPE 50MMX66MTS (BROWN) - VIFE6650C QTY: 1 ₵36.00 -
×
WOOD CHISEL MAX-PRO 35MM - VIFMXP35 QTY: 1 ₵109.00 -
×
ACRYLIC CHROME SPRAY - VISAC QTY: 1 ₵63.00 -
×
FLAT PAINT BRUSH 1/2" - VITJ12 QTY: 1 ₵23.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
CROBAR 100CM - VIP100 QTY: 1 ₵168.00 -
×
NITRILE-COATED GLOVE 7" - VILN7 QTY: 1 ₵12.00 -
×
COMBINATION RATCHET SPANNER 15MM - VICCR15 QTY: 1 ₵80.00 -
×
-
×
M8 SPEED MEASURING TAPE 25 MM X 8 M - VIFM8S QTY: 1 ₵77.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
38MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB38 QTY: 1 ₵34.00
-
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
6-PIECE HOLE SAW SET - VIJ9SC QTY: 1 ₵491.00 -
×
BALL PEIN HAMMER - VIB500 QTY: 1 ₵123.00 -
×
SOLID 1 PIECE HAMMER BIMATERIAL HANDLE - VIMM QTY: 1 ₵217.00 -
×
BLACK IRON SQUARE 400X600MM - VIEP QTY: 1 ₵80.00 -
×
BALL PEIN HAMMER - VIB700 QTY: 1 ₵153.00
-
×
TOWER PINCER WITH BIMATERIAL HANDLE 180MM - VITCB180 QTY: 1 ₵86.00 -
×
HAND PALLET TRUCK 2,5 T - VIPP25 QTY: 1 ₵4,477.00 -
×
WELDING ELECTRODE RUTILE E6013 3.2 x 350mm - VIER32 QTY: 1 ₵7.00 -
×
25MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB25 QTY: 1 ₵31.00
-
×
HANDCART (EURO PNEUMATIC 90LTS) - VICA4 QTY: 1 ₵781.00 -
×
TAPE DISPENSER WITH 2 PACKING TAPES - VICJAF QTY: 1 ₵145.00 -
×
BACK SAW CUT-PRO 300 MM - VISCCP300 QTY: 1 ₵128.00 -
×
COMBINATION RATCHET SPANNER 10MM - VICCR10 QTY: 1 ₵61.00
-
×
75mm TCT SDS-PLUS CORE DRILL - VIBCP75 QTY: 1 ₵207.00 -
×
BLADES FOR COPING SAW - VIFSTM5 QTY: 1 ₵36.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 1 ₵588.00 -
×
COMBINATION RATCHET SPANNER 14MM - VICCR14 QTY: 1 ₵75.00
-
×
12.00MM HSS TWIST DRILL BIT - VIHS12 QTY: 1 ₵72.00
-
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 1 ₵12.00
-
×
S1P SUEDE BOOT GENES (EU SIZE 39) - VIBG39 QTY: 1 ₵361.00
-
×
BENCH VICE - VITB125 QTY: 1 ₵980.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 1 ₵239.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 500MM - VISCA500 QTY: 1 ₵138.00
-
×
-
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
SET OF 50 NUISANCE DUST MASKS - VIMH50 QTY: 1 ₵94.00 -
×
-
×
8.00MM HSS TWIST DRILL BIT - VIHS8 QTY: 1 ₵37.00
-
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM - VIG80500 QTY: 1 ₵159.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
