-
×
LONG BENT NOSE PLIER 150MM - VIAPOC150 QTY: 2 ₵94.00 -
×
SET OF 3 WATER SANDPAPER 100 - VILA100BL QTY: 2 ₵35.00 -
×
AJUSTABLE HACKSAW FOR METAL 300MM - VISCFE QTY: 1 ₵55.00 -
×
PICKAXE WITH WOODEN HANDLE - VIPPBM QTY: 2 ₵101.00 -
×
MULTIPURPOSE PVC-DOTTED NON-SLIP GLOVE - VILMA QTY: 1 ₵13.00 -
×
SAFETY HELMET WITH FACE SHIELD AND EAR MUFFS - VICSPFA QTY: 1 ₵413.00 -
×
SWIVEL-HEAD RIVETING PLIER - VIARCR QTY: 1 ₵358.00 -
×
HALF FACE MASK 757 2 FILTERS - VIM757 QTY: 1 ₵239.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
POLISHER 1200W - VIP1200A QTY: 1 ₵838.00 -
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 1 ₵21.00 -
×
BENCH VICE - VITB125 QTY: 2 ₵980.00 -
×
NAIL NO. 9 14MM - VIAP914 QTY: 1 ₵54.00 -
×
PLASTERBOARD HANDSAW 500 MM - VISG500 QTY: 1 ₵177.00 -
×
WELDING ELECTRODE RUTILE E6013 2.5 x 350mm - VIER25 QTY: 1 ₵6.00 -
×
10MM WOOD SPADE - VIPUA10 QTY: 1 ₵25.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
CORDLESS CIRCULAR SAW 20V LI - VIBCSCSFL20 QTY: 1 ₵917.00 -
×
BOLT CUTTER PRO 18" - VICVP18 QTY: 1 ₵239.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 41) - VIBG41 QTY: 1 ₵361.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
CROBAR 40CM - VIP40 QTY: 1 ₵85.00 -
×
SLOTTED PARALLEL SCREWDRIVER PRO - VICFPPB375 QTY: 1 ₵42.00 -
×
ACRYLIC CHROME SPRAY - VISAC QTY: 1 ₵63.00 -
×
50MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB50 QTY: 1 ₵36.00 -
×
REINFORCED LEATHER GLOVE - VILPPR QTY: 1 ₵47.00 -
×
CROBAR 70CM - VIP70 QTY: 1 ₵118.00
-
×
MAGNETIC ALUMINIUM LEVEL PRO 120CM - VINP120 QTY: 1 ₵322.00 -
×
PADLOCK 70MM - VIAQ70 QTY: 1 ₵262.00 -
×
STAINLESS STEEL CUTTING DISC - VIDI125 QTY: 1 ₵12.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM - VIG80300 QTY: 1 ₵152.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00 -
×
BENT NOSE PIPE WRENCH 1.5" - VICTS15 QTY: 1 ₵229.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM - VIG80200 QTY: 1 ₵137.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
