-
×
COMBINATION RATCHET SPANNER 17MM - VICCR17 QTY: 1 ₵93.00 -
×
COMBINATION RATCHET SPANNER 9MM - VICCR9 QTY: 1 ₵63.00
-
×
TAPE DISPENSER WITH 2 PACKING TAPES - VICJAF QTY: 1 ₵145.00 -
×
COMBINATION PLIER 200MM - VIAU200 QTY: 1 ₵120.00 -
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 2 ₵12.00 -
×
9MMX10MTS FLEXIBLE DRAIN AND WASTE PIPE UNBLOCKER - VIGL10 QTY: 1 ₵197.00 -
×
PICKAXE WITH WOODEN HANDLE - VIPPBM QTY: 1 ₵101.00 -
×
WOOD CHISEL MAX-PRO 28MM - VIFMXP28 QTY: 1 ₵104.00 -
×
-
×
S5 PVC SAFETY BOOT (SIZE 41) - VIBAS41 QTY: 2 ₵169.00 -
×
FLAT BASTARD CUT FILE 8" BLISTER - VILCB8 QTY: 1 ₵49.00 -
×
LONG BENT NOSE PLIER 150MM - VIAPOC150 QTY: 1 ₵94.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 48) - VIJCC48 QTY: 1 ₵335.00 -
×
-
×
STAPLES FOR PNEUMATIC TOOL 16MM - VIAFP16 QTY: 2 ₵57.00 -
×
-
×
8PCS SCREWDRIVER SET - VICCPB8 QTY: 1 ₵226.00 -
×
RIVETING PLIER - VIAREB QTY: 2 ₵151.00 -
×
BACK SAW CUT-PRO 300 MM - VISCCP300 QTY: 1 ₵128.00 -
×
BOLT CUTTER PRO 30" - VICVP30 QTY: 1 ₵544.00 -
×
HAND PALLET TRUCK 3,0 T - VIPP30 QTY: 1 ₵6,458.00 -
×
HANDSAW CUT-PRO 450MM - VISCP450 QTY: 1 ₵152.00 -
×
COMBINATION RATCHET SPANNER 21MM - VICCR21 QTY: 1 ₵129.00
-
×
CIRCULAR SAW 1200W 185MM - VISC12185A QTY: 1 ₵836.00 -
×
HAND PALLET TRUCK 2,5 T - VIPP25 QTY: 1 ₵4,477.00
-
×
TRY SQUARE 350MM - VIEC350 QTY: 2 ₵140.00 -
×
HANDCART (PNEUMATIC WHEEL 85LTS) - VICA1 QTY: 1 ₵744.00 -
×
COMBINATION PLIER 175MM - VIAU175 QTY: 1 ₵112.00
-
×
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE - VIA458 QTY: 1 ₵89.00 -
×
BACK SAW WITH BI-MATERIAL HANDLE 300MM - VISCO300 QTY: 1 ₵121.00 -
×
ANGLE GRINDER 2200W 230MM - VIRE23022A QTY: 1 ₵1,219.00 -
×
DARK-TINTED LENESES SAFETY SPECTACLES 2172 - VIO2172E QTY: 1 ₵50.00 -
×
-
×
S5 PVC SAFETY BOOT (SIZE 45) - VIBAS45 QTY: 1 ₵169.00
-
×
SHOE SPIRIT S1P Nº44 - VISSP44 QTY: 1 ₵745.00 -
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 1 ₵21.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 450MM - VISCA450 QTY: 1 ₵127.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 37) - VIBO37 QTY: 1 ₵439.00 -
×
HANDCART (EURO PNEUMATIC 90LTS) - VICA4 QTY: 1 ₵781.00 -
×
1/2" AIR RATCHET WRENCH - VICRP12 QTY: 1 ₵403.00 -
×
SET OF 3 PARTICULATE RESPIRATORS FFP1 - VIC821P1 QTY: 1 ₵46.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
CLAW HAMMER - VIMC27 QTY: 1 ₵112.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 1 ₵361.00 -
×
CUTTER MATOCK HAMMER FIBERGLASS HANDLE - VIPPMF QTY: 1 ₵101.00 -
×
CROBAR 80CM - VIP80 QTY: 1 ₵131.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 41) - VIBO41 QTY: 1 ₵439.00
-
×
HALF FACE MASK 757 2 FILTERS - VIM757 QTY: 1 ₵239.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
