-
×
63MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB63 QTY: 1 ₵38.00 -
×
ELECTRONICS COMBINATION PLIER - VIAUE130 QTY: 1 ₵59.00 -
×
WORKBENCH - VIBTR QTY: 2 ₵5,682.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00 -
×
-
×
SET OF 12 COMBINATION RATCHET SPANNERS - VIJCCR12 QTY: 1 ₵537.00 -
×
SET OF 6PCS SCREWDRIVER PRO - VICCPB6 QTY: 1 ₵235.00 -
×
BATTERY 20V LI 4AH - VIBCBL204 QTY: 1 ₵651.00 -
×
COMBINATION RATCHET SPANNER 19MM - VICCR19 QTY: 1 ₵102.00 -
×
NITRILE-COATED GLOVE 8" - VILN8 QTY: 1 ₵12.00 -
×
BACK SAW WITH BI-MATERIAL HANDLE 300MM - VISCO300 QTY: 1 ₵121.00 -
×
WOOD CHISEL MAX-PRO 12MM - VIFMXP12 QTY: 1 ₵87.00 -
×
-
×
MAGNETIC ALUMINIUM LEVEL PRO 120CM - VINP120 QTY: 1 ₵322.00 -
×
WOOD CHISEL MAX-PRO 8MM - VIFMXP8 QTY: 1 ₵86.00
-
×
F-CLAMP WITH BIMATERIAL HANDLE 50X200MM - VIG50200 QTY: 1 ₵92.00 -
×
MANUAL PIPE THREADER FOR PVC PIPE - VITA12 QTY: 1 ₵126.00 -
×
12/24 V BATTERY CHARGER - VICB16S QTY: 1 ₵909.00 -
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 38) - VIBG38 QTY: 2 ₵361.00 -
×
FLAT PAINT BRUSH 1" - VITJ1 QTY: 2 ₵26.00 -
×
10PCS SK4 BLADES FOR UTILITY KNIFE 18MM PRO - VILXP18 QTY: 3 ₵39.00 -
×
SET OF 3 WATER SANDPAPER 600 - VILA600BL QTY: 1 ₵33.00 -
×
PNEUMATIC DRILL 3/8" - VIBP38A QTY: 1 ₵376.00 -
×
ACRILIC RED SPRAY - VISAVM QTY: 1 ₵55.00 -
×
ACRYLIC PEARL WHITE SPRAY - VISABF QTY: 1 ₵55.00 -
×
10MM WOOD SPADE - VIPUA10 QTY: 1 ₵25.00 -
×
ACRYLIC FLUORESCENT RED SPRAY - VISAFVM QTY: 1 ₵67.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
WOOD CHISEL MAX-PRO 28MM - VIFMXP28 QTY: 1 ₵104.00
-
×
DRYWALL SANDER 800 W - VILG800 QTY: 1 ₵1,211.00 -
×
COMBINATION RATCHET SPANNER 11MM - VICCR11 QTY: 1 ₵64.00
-
×
-
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
WOOD CHISEL MAX-PRO 22MM - VIFMXP22 QTY: 1 ₵95.00
-
×
COMBINATION RATCHET SPANNER 13MM - VICCR13 QTY: 1 ₵72.00
-
×
S5 PVC SAFETY BOOT (SIZE 39) - VIBAS39 QTY: 1 ₵169.00 -
×
PICKAXE HEAD 2.5KG - VIP25 QTY: 1 ₵124.00 -
×
IRON GRINDING DISC 230 - VIRE230 QTY: 1 ₵56.00 -
×
BRUSHLESS COMBI DRILL 20V + BMC CASE + CHARGER - VIBCBBBMCC QTY: 1 ₵1,244.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 44) - VIBO44 QTY: 1 ₵439.00 -
×
CROBAR 50CM - VIP50 QTY: 1 ₵99.00 -
×
ROUND WOOD RASP 8" - VIGC8 QTY: 1 ₵64.00 -
×
SET OF 3 PARTICULATE RESPIRATORS FFP1 - VIC821P1 QTY: 1 ₵46.00 -
×
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) - VICCIPB4 QTY: 1 ₵139.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 46) - VIBO46 QTY: 1 ₵439.00
-
×
SPRAY ACRYLIC PAINT WHITE - VISABR QTY: 1 ₵55.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 9MM - VILX9A QTY: 1 ₵22.00 -
×
STEEL WIRE CUTTER 200MM - VIACC200 QTY: 1 ₵122.00 -
×
RING SPANNER 30X32 - VICL3032 QTY: 1 ₵144.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
