-
×
CROBAR 40CM - VIP40 QTY: 1 ₵85.00 -
×
RED EARMUFF (27dB) - VIP1310 QTY: 2 ₵71.00 -
×
WELDING ELECTRODE RUTILE E6013 3.2 x 350mm - VIER32 QTY: 3 ₵7.00 -
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 4 ₵239.00 -
×
WOOD CHISEL MAX-PRO 38MM - VIFMXP38 QTY: 1 ₵113.00 -
×
600W DRYWALL SCREWDRIVER - VIBEP QTY: 2 ₵834.00 -
×
HANDCART (LARGE WHEEL 400 85LTS) - VICA2 QTY: 1 ₵744.00 -
×
MXR5 SPEED MEASURING TAPE 19 MM X 5 M - VIFMXR5S QTY: 1 ₵62.00 -
×
WOOD CHISEL MAX-PRO 14MM - VIFMXP14 QTY: 2 ₵90.00
-
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 9MM - VILX9A QTY: 1 ₵22.00 -
×
BATTERY 20V LI 6AH - VIBCBL206 QTY: 1 ₵918.00 -
×
PVC INSULATION TAPE (WHITE) - VIFI1920B QTY: 1 ₵21.00 -
×
TRY SQUARE 300MM - VIEC300 QTY: 1 ₵132.00 -
×
BELT SANDER 900W - VILR900 QTY: 1 ₵760.00 -
×
IRON BAR BENDER 14X16MM (37840) - VICDF1416 QTY: 1 ₵189.00 -
×
1/4" LINEAR JOINT WITH MILLED NUTS - VIJD QTY: 1 ₵45.00 -
×
S5 PVC SAFETY BOOT (SIZE 44) - VIBAS44 QTY: 1 ₵169.00 -
×
UTILITY KNIFE 25MM SK5 BLADES - VIX25A QTY: 1 ₵91.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 500MM - VISCA500 QTY: 1 ₵138.00 -
×
18 X 300MM FLAT CHISEL WITH HAND GUARD - VITP12 QTY: 1 ₵72.00 -
×
75MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB75 QTY: 1 ₵39.00 -
×
DISPOSABLE COVERALL CAT. 3 / TYPE 5-6 - VIFDPPXL QTY: 1 ₵69.00 -
×
ANGLE GRINDER 850W 115MM - VIRE11585A QTY: 1 ₵516.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 48) - VIJCC48 QTY: 1 ₵335.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
SELF RETRACTING UTILITY KNIFE 18MM SK5 BLADES - VIX18AA QTY: 1 ₵99.00 -
×
ACRYLIC CHROME SPRAY - VISAC QTY: 1 ₵63.00 -
×
HIGH PRESSURE WASHER WR3 150B - VIML150WR3 QTY: 1 ₵3,313.00 -
×
18 X 300MM POINT CHISEL WITH HAND GUARD - VIPP12 QTY: 1 ₵70.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
COMBINATION RATCHET SPANNER 22MM - VICCR22 QTY: 1 ₵144.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
