-
×
FLAT BASTARD CUT FILE 8" BLISTER - VILCB8 QTY: 1 ₵49.00 -
×
WELDING ELECTRODE RUTILE E6013 3.2 x 350mm - VIER32 QTY: 1 ₵7.00 -
×
1/4" LINEAR JOINT WITH MILLED NUTS - VIJD QTY: 1 ₵45.00 -
×
BLACK RUBBER MALLET 250G - VIMBP250 QTY: 1 ₵74.00 -
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
80mm TCT SDS-PLUS CORE DRILL - VIBCP80 QTY: 1 ₵225.00 -
×
ACRYLIC CHROME SPRAY - VISAC QTY: 2 ₵63.00 -
×
SOLID 1 PIECE HAMMER BIMATERIAL HANDLE - VIMM QTY: 1 ₵217.00 -
×
BALL PEIN HAMMER - VIB700 QTY: 1 ₵153.00 -
×
FLAT BASTARD CUT FILE 10" BLISTER - VILCB10 QTY: 1 ₵68.00
-
×
INTERNAL CIRCLIPS PLIER 150MM - VIAFI150 QTY: 2 ₵85.00 -
×
CROBAR 100CM - VIP100 QTY: 1 ₵168.00 -
×
CLAW HAMMER - VIMC27 QTY: 1 ₵112.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 1 ₵361.00 -
×
-
×
ACRYLIC FLUORESCENT YELLOW SPRAY - VISAFAM QTY: 1 ₵67.00 -
×
PRO UTILITY KNIFE W/ 5PCS SK4 BLADE - VIFAPR QTY: 1 ₵96.00 -
×
9.00MM HSS TWIST DRILL BIT - VIHS9 QTY: 1 ₵45.00 -
×
CIRCULAR SAW 1200W 185MM - VISC12185A QTY: 1 ₵836.00 -
×
S5 PVC SAFETY BOOT (SIZE 39) - VIBAS39 QTY: 2 ₵169.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
-
×
-
×
BRUSHLESS COMBI DRILL 20V + BMC CASE + CHARGER - VIBCBBBMCC QTY: 1 ₵1,244.00 -
×
HANDCART (LARGE WHEEL 400 85LTS) - VICA2 QTY: 1 ₵744.00 -
×
HAND SMOOTH CUT FILE 8" BLISTER - VILPM8 QTY: 2 ₵59.00 -
×
WOOD CHISEL MAX-PRO 38MM - VIFMXP38 QTY: 1 ₵113.00 -
×
TRY SQUARE 350MM - VIEC350 QTY: 1 ₵140.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM - VIG80200 QTY: 1 ₵137.00 -
×
SQUARE SMOOTH CUT FILE 6" BLISTER - VILQM6 QTY: 1 ₵58.00 -
×
LARGE VOLTAGE TESTER - VIBPG QTY: 1 ₵32.00
-
×
S5 PVC SAFETY BOOT (SIZE 43) - VIBAS43 QTY: 1 ₵169.00
-
×
ACRYLIC BLACK SPRAY - VISAPRB QTY: 2 ₵55.00 -
×
WOOD CHISEL MAX-PRO 19MM - VIFMXP19 QTY: 1 ₵93.00
-
×
HANDCART (EURO PNEUMATIC 90LTS) - VICA4 QTY: 1 ₵781.00 -
×
STAINLESS STEEL CUTTING DISC - VIDI125 QTY: 1 ₵12.00 -
×
PROFESSIONAL HACKSAW 550MM - VISC10222 QTY: 1 ₵184.00 -
×
BELT SANDER 900W - VILR900 QTY: 1 ₵760.00 -
×
TAPES AND DIES SET (16PCS) - VICMC16 QTY: 1 ₵292.00 -
×
PVC INSULATION TAPE (RED) - VIFI1920VM QTY: 1 ₵21.00 -
×
MOULD FORGED CROSS HAMMER - VIMTM1000 QTY: 1 ₵130.00 -
×
NAIL NO. 9 14MM - VIAP914 QTY: 1 ₵54.00 -
×
BENCH VICE - VITB125 QTY: 1 ₵980.00 -
×
-
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
