-
×
11.00MM HSS TWIST DRILL BIT - VIHS11 QTY: 1 ₵61.00 -
×
NITRILE-COATED GLOVE 7" - VILN7 QTY: 1 ₵12.00 -
×
-
×
DRYWALL SANDER 800 W - VILG800 QTY: 1 ₵1,211.00 -
×
HIGH PRESSURE WASHER WR3 150B - VIML150WR3 QTY: 1 ₵3,313.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 2 ₵89.00 -
×
FLAT PAINT BRUSH 1" - VITJ1 QTY: 1 ₵26.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 46) - VIBG46 QTY: 1 ₵361.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00
-
×
1/4" LINEAR JOINT WITH MILLED NUTS - VIJD QTY: 1 ₵45.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 50X250MM - VIG50250 QTY: 1 ₵96.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 37) - VIBG37 QTY: 1 ₵361.00
-
×
PROFESSIONAL HACKSAW 600MM - VISC10224 QTY: 1 ₵189.00 -
×
EARTH CLAMP 500A - VIAM500A QTY: 1 ₵65.00 -
×
EXTERNAL CIRCLIPS PLIER 170MM - VIAFE150 QTY: 2 ₵85.00 -
×
PVC TRAFFIC CONE 30X50CM - VICS QTY: 1 ₵175.00 -
×
HEPA FILTER - VIASL40FH QTY: 1 ₵94.00 -
×
IRON BAR BENDER 6X8MM (37800) - VICDF68 QTY: 1 ₵106.00 -
×
10MM WOOD SPADE - VIPUA10 QTY: 1 ₵25.00 -
×
RETRACTABLE KNIFE EXHIBITOR 18MM - VIEX1824A QTY: 2 ₵1,219.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
18 X 300MM POINT CHISEL WITH HAND GUARD - VIPP12 QTY: 1 ₵70.00
-
×
1500W PIPE WELDING MACHINE WITH CASE - VIP1500 QTY: 1 ₵909.00 -
×
IRON CUTTING DISC 230MM - VICF230 QTY: 1 ₵25.00 -
×
600W DRYWALL SCREWDRIVER - VIBEP QTY: 1 ₵834.00 -
×
75MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB75 QTY: 1 ₵39.00 -
×
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE - VIPQ150 QTY: 1 ₵128.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 41) - VIBO41 QTY: 1 ₵439.00 -
×
-
×
CORDLESS SCREWDRIVER 20V LI - VIBCASFL20 QTY: 1 ₵645.00 -
×
ACRYLIC FADE BLACK SPRAY - VISAPR QTY: 1 ₵55.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 39) - VIBG39 QTY: 1 ₵361.00
-
×
DARK GLASS FOR HAND-HELD WELDING MASK - VIVMSE QTY: 1 ₵32.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 1 ₵588.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 500MM - VISCA500 QTY: 1 ₵138.00 -
×
BELT COMPRESSOR 200 10BAR 4HP - VICOC200B QTY: 1 ₵8,556.00 -
×
CIRCULAR SAW 1200W 185MM - VISC12185A QTY: 2 ₵836.00 -
×
IRON CUTTING DISC 125MM - VICF125 QTY: 1 ₵16.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 42) - VIJCC42 QTY: 1 ₵335.00 -
×
NITRILE-COATED GLOVE 6" - VILN6 QTY: 1 ₵12.00
-
×
DEMOLITION HAMMER 1700 W - VIMD1700 QTY: 1 ₵3,782.00 -
×
WOOD CHISEL MAX-PRO 10MM - VIFMXP10 QTY: 1 ₵87.00 -
×
7 DRAWER ROLLER CABINET - VITF7G QTY: 1 ₵5,514.00 -
×
DRILLING HAMMER - VIMB1000 QTY: 1 ₵137.00 -
×
CARPENTER PINCER 180MM - VITC180 QTY: 1 ₵76.00 -
×
SHOE SPIRIT S1P Nº44 - VISSP44 QTY: 1 ₵745.00
-
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
TRY SQUARE 300MM – VIEC300
₵132.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
-
STILLSON-TYPE PIPE WRENCH 10″ – VICHST10
₵131.00Add to cartHead and body in chrome vanadium steel.
-
IRON BAR BENDER 10X12MM (37820) – VICDF1012
₵131.00Add to cartIron bending wrench, made of tempered steel.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 250MM – VICIBP10
₵129.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
COMBINATION RATCHET SPANNER 21MM – VICCR21
₵129.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
BACK SAW WITH BI-MATERIAL HANDLE 350MM – VISCO350
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 11 teeth per inch.
-
BACK SAW CUT-PRO 300 MM – VISCCP300
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE – VIPQ150
₵128.00Add to cartVernier caliper with stainless steel body, 0,02 measurement accuracy. It has a fixing screw, a maximum measuring range of 0-150 mm and allows a quick mm/inch conversion.
-
CLAW HAMMER 29MM – VIMC29
₵128.00Add to cartPolished carpenter's hammer, made of tempered steel and with a Genuine Hickory wooden handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 450MM – VISCA450
₵127.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
COMBINATION RATCHET SPANNER 20MM – VICCR20
₵125.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
PICKAXE HEAD 2.5KG – VIP25
₵124.00Add to cartPickaxe with a 48 mm eye, has a dimension of 570 x 61 mm.
-
TRY SQUARE 250MM – VIEC250
₵124.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
BALL PEIN HAMMER – VIB500
₵123.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
SQUARE SHOVEL METAL HANDLE – VIPVCF
₵122.00Add to cartSquare trench shovel, with wooden handle and Y-shaped grip.
-
STEEL WIRE CUTTER 200MM – VIACC200
₵122.00Add to cartSteel wire cutter, with induction hardened cutting edges, body forged in chrome vanadium steel, lockable clasp and handles in bi-material which guarantee greater comfort.
