-
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
SCISSOR LIFT PALLET TRUCK 1.5 T - VIPPE15 QTY: 1 ₵7,925.00 -
×
ELECTRONICS COMBINATION PLIER - VIAUE130 QTY: 1 ₵59.00 -
×
PVC INSULATION TAPE (WHITE) - VIFI1920B QTY: 1 ₵21.00 -
×
BACK SAW CUT-PRO 350 MM - VISCCP350 QTY: 1 ₵134.00 -
×
COMBINATION PLIER 200MM - VIAU200 QTY: 1 ₵120.00 -
×
CROBAR 70CM - VIP70 QTY: 1 ₵118.00 -
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
12.00MM HSS TWIST DRILL BIT - VIHS12 QTY: 1 ₵72.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00
-
×
125MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB125 QTY: 1 ₵45.00 -
×
IRON CUTTING DISC 230MM - VICF230 QTY: 2 ₵25.00 -
×
ACRILIC RED SPRAY - VISAVM QTY: 1 ₵55.00 -
×
GLUE GUN 60W - VIPCB60 QTY: 1 ₵105.00 -
×
ADJUSTABLE WRENCH PRO 375MM - VICIP15 QTY: 1 ₵254.00 -
×
BACK SAW WITH BI-MATERIAL HANDLE 300MM - VISCO300 QTY: 1 ₵121.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 2 ₵1,868.00 -
×
STEEL WIRE CUTTER 200MM - VIACC200 QTY: 1 ₵122.00 -
×
CORDLESS CIRCULAR SAW 20V LI - VIBCSCSFL20 QTY: 1 ₵917.00 -
×
METAL GRINDING DISC 180 - VIRE180 QTY: 1 ₵43.00 -
×
38MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB38 QTY: 1 ₵34.00
-
×
ANGLE GRINDER 2200W 230MM - VIRE23022A QTY: 1 ₵1,219.00 -
×
S5 PVC SAFETY BOOT (SIZE 38) - VIBAS38 QTY: 1 ₵169.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 50X200MM - VIG50200 QTY: 1 ₵92.00 -
×
SET OF 3 WATER SANDPAPER 800 - VILA800BL QTY: 1 ₵33.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X800MM - VIG80800 QTY: 1 ₵191.00
-
×
DARK GLASS FOR HAND-HELD WELDING MASK - VIVMSE QTY: 1 ₵32.00 -
×
DIGITAL CALIPER 150MM - VIPQD150 QTY: 1 ₵258.00 -
×
HANDSAW CUT-PRO 500MM - VISCP500 QTY: 1 ₵158.00 -
×
WOOD CHISEL MAX-PRO 28MM - VIFMXP28 QTY: 1 ₵104.00 -
×
IRON GRINDING DISC 230 - VIRE230 QTY: 1 ₵56.00
-
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
TRY SQUARE 300MM – VIEC300
₵132.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
-
STILLSON-TYPE PIPE WRENCH 10″ – VICHST10
₵131.00Add to cartHead and body in chrome vanadium steel.
-
IRON BAR BENDER 10X12MM (37820) – VICDF1012
₵131.00Add to cartIron bending wrench, made of tempered steel.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 250MM – VICIBP10
₵129.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
COMBINATION RATCHET SPANNER 21MM – VICCR21
₵129.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
BACK SAW WITH BI-MATERIAL HANDLE 350MM – VISCO350
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 11 teeth per inch.
-
BACK SAW CUT-PRO 300 MM – VISCCP300
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE – VIPQ150
₵128.00Add to cartVernier caliper with stainless steel body, 0,02 measurement accuracy. It has a fixing screw, a maximum measuring range of 0-150 mm and allows a quick mm/inch conversion.
-
CLAW HAMMER 29MM – VIMC29
₵128.00Add to cartPolished carpenter's hammer, made of tempered steel and with a Genuine Hickory wooden handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 450MM – VISCA450
₵127.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
COMBINATION RATCHET SPANNER 20MM – VICCR20
₵125.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
PICKAXE HEAD 2.5KG – VIP25
₵124.00Add to cartPickaxe with a 48 mm eye, has a dimension of 570 x 61 mm.
-
TRY SQUARE 250MM – VIEC250
₵124.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
BALL PEIN HAMMER – VIB500
₵123.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
SQUARE SHOVEL METAL HANDLE – VIPVCF
₵122.00Add to cartSquare trench shovel, with wooden handle and Y-shaped grip.
-
STEEL WIRE CUTTER 200MM – VIACC200
₵122.00Add to cartSteel wire cutter, with induction hardened cutting edges, body forged in chrome vanadium steel, lockable clasp and handles in bi-material which guarantee greater comfort.
