-
×
SAFETY HELMET WITH FACE SHIELD AND EAR MUFFS - VICSPFA QTY: 1 ₵413.00 -
×
MXR5 SPEED MEASURING TAPE 19 MM X 5 M - VIFMXR5S QTY: 1 ₵62.00 -
×
BRUSHLESS COMBI DRILL 20V + BMC CASE + CHARGER - VIBCBBBMCC QTY: 1 ₵1,244.00 -
×
FLAT BASTARD CUT FILE 6" BLISTER - VILCB6 QTY: 1 ₵40.00 -
×
EARTH CLAMP 500A - VIAM500A QTY: 1 ₵65.00 -
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
SINGLE LEATHER TOOL POUCH - VIBSC QTY: 1 ₵220.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00 -
×
NAIL NO. 9 14MM - VIAP914 QTY: 1 ₵54.00 -
×
70mm TCT SDS-PLUS CORE DRILL - VIBCP70 QTY: 1 ₵180.00 -
×
-
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
7 DRAWER ROLLER CABINET - VITF7G QTY: 1 ₵5,514.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 39) - VIBG39 QTY: 1 ₵361.00 -
×
-
×
HANDCART (EURO PNEUMATIC 90LTS) - VICA4 QTY: 1 ₵781.00 -
×
BATTERY 20V LI 4AH - VIBCBL204 QTY: 1 ₵651.00 -
×
PIC AXE HAMMER FIBERGLASS HANDLE - VIPPBF QTY: 1 ₵101.00 -
×
ROUND BRUSH Nº4 - VIPR4 QTY: 1 ₵20.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 42) - VIBG42 QTY: 1 ₵361.00
-
×
UTILITY KNIFE 25MM SK5 BLADES - VIX25A QTY: 1 ₵91.00
-
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
STANDARD BLOW GUN (SET 3 NOZZLES) - VIPLP3 QTY: 1 ₵94.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 450MM - VISCA450 QTY: 1 ₵127.00
-
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
TRY SQUARE 300MM – VIEC300
₵132.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
-
STILLSON-TYPE PIPE WRENCH 10″ – VICHST10
₵131.00Add to cartHead and body in chrome vanadium steel.
-
IRON BAR BENDER 10X12MM (37820) – VICDF1012
₵131.00Add to cartIron bending wrench, made of tempered steel.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 250MM – VICIBP10
₵129.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
COMBINATION RATCHET SPANNER 21MM – VICCR21
₵129.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
BACK SAW WITH BI-MATERIAL HANDLE 350MM – VISCO350
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 11 teeth per inch.
-
BACK SAW CUT-PRO 300 MM – VISCCP300
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE – VIPQ150
₵128.00Add to cartVernier caliper with stainless steel body, 0,02 measurement accuracy. It has a fixing screw, a maximum measuring range of 0-150 mm and allows a quick mm/inch conversion.
-
CLAW HAMMER 29MM – VIMC29
₵128.00Add to cartPolished carpenter's hammer, made of tempered steel and with a Genuine Hickory wooden handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 450MM – VISCA450
₵127.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
COMBINATION RATCHET SPANNER 20MM – VICCR20
₵125.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
PICKAXE HEAD 2.5KG – VIP25
₵124.00Add to cartPickaxe with a 48 mm eye, has a dimension of 570 x 61 mm.
-
TRY SQUARE 250MM – VIEC250
₵124.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
BALL PEIN HAMMER – VIB500
₵123.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
SQUARE SHOVEL METAL HANDLE – VIPVCF
₵122.00Add to cartSquare trench shovel, with wooden handle and Y-shaped grip.
-
STEEL WIRE CUTTER 200MM – VIACC200
₵122.00Add to cartSteel wire cutter, with induction hardened cutting edges, body forged in chrome vanadium steel, lockable clasp and handles in bi-material which guarantee greater comfort.
