-
×
CROSS PEIN HAMMER - VIMP340 QTY: 1 ₵94.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM - VIG80500 QTY: 1 ₵159.00 -
×
CROBAR 80CM - VIP80 QTY: 2 ₵131.00 -
×
TAPES AND DIES SET (16PCS) - VICMC16 QTY: 1 ₵292.00 -
×
S5 PVC SAFETY BOOT (SIZE 44) - VIBAS44 QTY: 1 ₵169.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
1500W PIPE WELDING MACHINE WITH CASE - VIP1500 QTY: 2 ₵909.00 -
×
PACKING TAPE 50MMX66MTS - VIFE6650T QTY: 1 ₵36.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
100MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB100 QTY: 1 ₵41.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 37) - VIBO37 QTY: 1 ₵439.00 -
×
BLACK RUBBER MALLET 450G - VIMBP450 QTY: 1 ₵74.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
COMBINATION RATCHET SPANNER 19MM - VICCR19 QTY: 1 ₵102.00 -
×
LUBRICANT SAW'S CHAIN - VIOCM5 QTY: 1 ₵176.00 -
×
70mm TCT SDS-PLUS CORE DRILL - VIBCP70 QTY: 1 ₵180.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 40) - VIBO40 QTY: 1 ₵439.00
-
×
GLUE GUN 10W - VIPCB10 QTY: 1 ₵65.00 -
×
CROBAR 70CM - VIP70 QTY: 1 ₵118.00
-
×
ALUMINIUM RULER 2,5M (10CM) - VIREA25 QTY: 1 ₵278.00 -
×
ACRILIC RED SPRAY - VISAVM QTY: 1 ₵55.00 -
×
PVC INSULATION TAPE (BLUE) - VIFI1920AZ QTY: 2 ₵21.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 1 ₵588.00 -
×
PROFESSIONAL RIVETING PLIER - VIARPR QTY: 1 ₵242.00 -
×
SK5 BLADE FOR RETRACTABLE UTILITY KNIFE 18MM - VILX18A QTY: 2 ₵31.00 -
×
18 X 250MM FLAT CHISEL WITH HAND GUARD - VITP10 QTY: 1 ₵70.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 41) - VIBG41 QTY: 1 ₵361.00 -
×
BELT COMPRESSOR 200 10BAR 4HP - VICOC200B QTY: 1 ₵8,556.00 -
×
BENCH VICE - VITB150 QTY: 1 ₵1,111.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 50X200MM - VIG50200 QTY: 1 ₵92.00
-
×
S1P SUEDE BOOT OXIS (EU SIZE 42) - VIBO42 QTY: 1 ₵439.00
-
×
MAGNETIC ALUMINIUM LEVEL PRO 120CM - VINP120 QTY: 1 ₵322.00 -
×
-
×
18 X 300MM POINT CHISEL WITH HAND GUARD - VIPP12 QTY: 1 ₵70.00
-
×
6-PIECE HOLE SAW SET - VIJ9SC QTY: 1 ₵491.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 45) - VIBG45 QTY: 1 ₵361.00
-
×
8.00MM HSS TWIST DRILL BIT - VIHS8 QTY: 1 ₵37.00 -
×
CROBAR 60CM - VIP60 QTY: 1 ₵111.00
-
×
SQUARE SHOVEL METAL HANDLE - VIPVCF QTY: 1 ₵122.00
-
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
TRY SQUARE 300MM – VIEC300
₵132.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
-
STILLSON-TYPE PIPE WRENCH 10″ – VICHST10
₵131.00Add to cartHead and body in chrome vanadium steel.
-
IRON BAR BENDER 10X12MM (37820) – VICDF1012
₵131.00Add to cartIron bending wrench, made of tempered steel.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 250MM – VICIBP10
₵129.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
COMBINATION RATCHET SPANNER 21MM – VICCR21
₵129.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
BACK SAW WITH BI-MATERIAL HANDLE 350MM – VISCO350
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 11 teeth per inch.
-
BACK SAW CUT-PRO 300 MM – VISCCP300
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE – VIPQ150
₵128.00Add to cartVernier caliper with stainless steel body, 0,02 measurement accuracy. It has a fixing screw, a maximum measuring range of 0-150 mm and allows a quick mm/inch conversion.
-
CLAW HAMMER 29MM – VIMC29
₵128.00Add to cartPolished carpenter's hammer, made of tempered steel and with a Genuine Hickory wooden handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 450MM – VISCA450
₵127.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
COMBINATION RATCHET SPANNER 20MM – VICCR20
₵125.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
PICKAXE HEAD 2.5KG – VIP25
₵124.00Add to cartPickaxe with a 48 mm eye, has a dimension of 570 x 61 mm.
-
TRY SQUARE 250MM – VIEC250
₵124.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
BALL PEIN HAMMER – VIB500
₵123.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
SQUARE SHOVEL METAL HANDLE – VIPVCF
₵122.00Add to cartSquare trench shovel, with wooden handle and Y-shaped grip.
-
STEEL WIRE CUTTER 200MM – VIACC200
₵122.00Add to cartSteel wire cutter, with induction hardened cutting edges, body forged in chrome vanadium steel, lockable clasp and handles in bi-material which guarantee greater comfort.
