-
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
PRESSURE PLIER PRO 175MM - VIAPP7 QTY: 1 ₵202.00 -
×
ACRYLIC FLUORESCENT RED SPRAY - VISAFVM QTY: 1 ₵67.00 -
×
SET OF 3 WATER SANDPAPER 800 - VILA800BL QTY: 1 ₵33.00 -
×
WASHING GUN - VIPLV QTY: 1 ₵160.00 -
×
ANTI-SLIP TAPE 25MM X 15M - VIFA2515 QTY: 1 ₵92.00 -
×
1/4" LINEAR JOINT WITH MILLED NUTS - VIJD QTY: 1 ₵45.00 -
×
STILLSON-TYPE PIPE WRENCH 10" - VICHST10 QTY: 1 ₵131.00 -
×
8-STEP ALUMINIUM STEP LADDER - VIEAC8 QTY: 1 ₵979.00 -
×
CORDLESS PERCUSSION COMBI DRILL 20V LI - VIBCBSFL20 QTY: 1 ₵600.00 -
×
MAGNETIC ALUMINIUM LEVEL 120CM - VINAL120 QTY: 1 ₵241.00 -
×
BATTERY 20V LI 6AH - VIBCBL206 QTY: 1 ₵918.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 2 ₵2,128.00 -
×
PICKAXE HEAD 2.5KG - VIP25 QTY: 1 ₵124.00 -
×
BENCH VICE - VITB150 QTY: 1 ₵1,111.00 -
×
ANGLE GRINDER 2600W 230MM - VIRE23026 QTY: 1 ₵1,481.00 -
×
SWIVEL-HEAD RIVETING PLIER - VIARCR QTY: 2 ₵358.00 -
×
7.50MM HSS TWIST DRILL BIT - VIHS7,5 QTY: 1 ₵34.00 -
×
HANDSAW CUT-PRO 500MM - VISCP500 QTY: 1 ₵158.00 -
×
DIGITAL CALIPER 150MM - VIPQD150 QTY: 1 ₵258.00 -
×
-
×
PRESS DRILL 500 W - VIMFC500A QTY: 1 ₵2,344.00 -
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
PVC INSULATION TAPE (RED) - VIFI1920VM QTY: 1 ₵21.00 -
×
100mm TCT SDS-PLUS CORE DRILL - VIBCP100 QTY: 1 ₵328.00 -
×
FLAT PAINT BRUSH 1" - VITJ1 QTY: 1 ₵26.00 -
×
AJUSTABLE HACKSAW FOR METAL 300MM - VISCFE QTY: 1 ₵55.00 -
×
POLISHER 1200W - VIP1200A QTY: 2 ₵838.00 -
×
50MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB50 QTY: 1 ₵36.00 -
×
PNEUMATIC DRILL 3/8" - VIBP38A QTY: 1 ₵376.00 -
×
SINGLE LEATHER TOOL POUCH - VIBSC QTY: 1 ₵220.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00
-
×
HALF ROUND SMOOTH CUT FILE 6" BLISTER - VILMCM6 QTY: 1 ₵58.00 -
×
-
×
S1P SUEDE BOOT GENES (EU SIZE 42) - VIBG42 QTY: 1 ₵361.00 -
×
CLAW HAMMER 29MM - VIMC29 QTY: 1 ₵128.00
-
-
F-CLAMP WITH BIMATERIAL HANDLE 80X200MM – VIG80200
₵137.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
DRILLING MACHINE – VIMM1
₵136.00Add to cartSledgehammer in tempered steel, Genuine Hickory wood handle.
-
ADJUSTABLE WRENCH PRO 250MM – VICIP10
₵136.00Add to cartPro spanner, in chrome vanadium steel body.
-
UTILITY KNIFE 9MM SK5 BLADES – VIX9A
₵135.00Add to cartUtility knife with SK5 blades, has a TPR-coated metal body, hanging loop and 3 SK5 blades.
-
BACK SAW CUT-PRO 350 MM – VISCCP350
₵134.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
TRY SQUARE 300MM – VIEC300
₵132.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
-
STILLSON-TYPE PIPE WRENCH 10″ – VICHST10
₵131.00Add to cartHead and body in chrome vanadium steel.
-
IRON BAR BENDER 10X12MM (37820) – VICDF1012
₵131.00Add to cartIron bending wrench, made of tempered steel.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 250MM – VICIBP10
₵129.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
COMBINATION RATCHET SPANNER 21MM – VICCR21
₵129.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
BACK SAW WITH BI-MATERIAL HANDLE 350MM – VISCO350
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 11 teeth per inch.
-
BACK SAW CUT-PRO 300 MM – VISCCP300
₵128.00Add to cartBack saw Cut Pro with SK5 carbon steel blades, rubber-coated handle and 8 teeth per inch.
-
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE – VIPQ150
₵128.00Add to cartVernier caliper with stainless steel body, 0,02 measurement accuracy. It has a fixing screw, a maximum measuring range of 0-150 mm and allows a quick mm/inch conversion.
-
CLAW HAMMER 29MM – VIMC29
₵128.00Add to cartPolished carpenter's hammer, made of tempered steel and with a Genuine Hickory wooden handle.
-
HANDSAW WITH BI-MATERIAL HANDLE 450MM – VISCA450
₵127.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
COMBINATION RATCHET SPANNER 20MM – VICCR20
₵125.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
PICKAXE HEAD 2.5KG – VIP25
₵124.00Add to cartPickaxe with a 48 mm eye, has a dimension of 570 x 61 mm.
-
TRY SQUARE 250MM – VIEC250
₵124.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
BALL PEIN HAMMER – VIB500
₵123.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
SQUARE SHOVEL METAL HANDLE – VIPVCF
₵122.00Add to cartSquare trench shovel, with wooden handle and Y-shaped grip.
-
STEEL WIRE CUTTER 200MM – VIACC200
₵122.00Add to cartSteel wire cutter, with induction hardened cutting edges, body forged in chrome vanadium steel, lockable clasp and handles in bi-material which guarantee greater comfort.
