-
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
-
×
WELDING ELECTRODE RUTILE E6013 2.5 x 350mm - VIER25 QTY: 1 ₵6.00 -
×
COMBINATION RATCHET SPANNER 16MM - VICCR16 QTY: 1 ₵86.00 -
×
BOLT CUTTER PRO 14" - VICVP14 QTY: 1 ₵189.00 -
×
PRESS DRILL 450 W - VIMFC450A QTY: 1 ₵3,147.00 -
×
SQUARE SHOVEL METAL HANDLE - VIPVCF QTY: 1 ₵122.00 -
×
FLAT PAINT BRUSH 2 1/2" - VITJ212 QTY: 1 ₵59.00 -
×
PADLOCK 70MM - VIAQ70 QTY: 1 ₵262.00 -
×
S5 PVC SAFETY BOOT (SIZE 41) - VIBAS41 QTY: 1 ₵169.00 -
×
COMBINATION RATCHET SPANNER 21MM - VICCR21 QTY: 1 ₵129.00
-
×
FAST CHARGER 20V - VIBCCR20 QTY: 1 ₵305.00 -
×
PNEUMATIC ANGLE GRINDER 100MM - VIRP100 QTY: 1 ₵748.00 -
×
MXR5 SPEED MEASURING TAPE 19 MM X 5 M - VIFMXR5S QTY: 1 ₵62.00 -
×
TRY SQUARE 350MM - VIEC350 QTY: 1 ₵140.00 -
×
8PCS SCREWDRIVER SET - VICCPB8 QTY: 1 ₵226.00 -
×
BACK SAW CUT-PRO 350 MM - VISCCP350 QTY: 1 ₵134.00 -
×
18 X 250MM FLAT CHISEL WITH HAND GUARD - VITP10 QTY: 1 ₵70.00 -
×
SET OF 3 WATER SANDPAPER 800 - VILA800BL QTY: 1 ₵33.00 -
×
CUT-RESISTANT GLOVE SUPER 9" - VILAS9 QTY: 1 ₵88.00 -
×
NITRILE-COATED GLOVE 7" - VILN7 QTY: 1 ₵12.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00 -
×
CLAW HAMMER 29MM - VIMC29 QTY: 1 ₵128.00 -
×
CROBAR 50CM - VIP50 QTY: 1 ₵99.00 -
×
ADJUSTABLE WRENCH PRO 375MM - VICIP15 QTY: 1 ₵254.00 -
×
ROUND BRUSH Nº8 - VIPR8 QTY: 1 ₵20.00 -
×
PNEUMATIC SANDER 150MM - VILP150 QTY: 1 ₵576.00 -
×
POLISHER 1200W - VIP1200A QTY: 1 ₵838.00 -
×
COMBINATION RATCHET SPANNER 9MM - VICCR9 QTY: 1 ₵63.00
-
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 1 ₵239.00 -
×
WELDING GOGGLE WITH VENTILATION - VIO1150 QTY: 1 ₵88.00 -
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00 -
×
SCISSOR LIFT PALLET TRUCK 1.5 T - VIPPE15 QTY: 1 ₵7,925.00 -
×
ANGLE GRINDER 2600W 230MM - VIRE23026 QTY: 2 ₵1,481.00 -
×
-
×
PROFESSIONAL HACKSAW 550MM - VISC10222 QTY: 1 ₵184.00 -
×
WELDING ELECTRODE RUTILE E6013 3.2 x 350mm - VIER32 QTY: 1 ₵7.00
-
×
DARK GLASS FOR HAND-HELD WELDING MASK - VIVMSE QTY: 1 ₵32.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
9.00MM HSS TWIST DRILL BIT - VIHS9 QTY: 1 ₵45.00
-
×
WOOD CHISEL MAX-PRO 14MM - VIFMXP14 QTY: 1 ₵90.00 -
×
9MMX10MTS FLEXIBLE DRAIN AND WASTE PIPE UNBLOCKER - VIGL10 QTY: 1 ₵197.00 -
×
ACRYLIC SPRAY PAINT (PRIMER) - VISAPRI QTY: 1 ₵58.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 37) - VIBG37 QTY: 1 ₵361.00 -
×
WOOD CHISEL MAX-PRO 12MM - VIFMXP12 QTY: 1 ₵87.00
-
×
PLASTERBOARD HANDSAW 500 MM - VISG500 QTY: 1 ₵177.00
-
ADJUSTABLE WRENCH PRO 300MM – VICIP12
₵178.00Add to cartPro spanner, in chrome vanadium steel body.
-
PLASTERBOARD HANDSAW 500 MM – VISG500
₵177.00Add to cartPlaster hand saw with SK5 carbon steel blades, rubber-coated handle and 7 teeth per inch.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 300MM – VICIBP12
₵177.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
MT LONG MEASURING TAPE 13 MM X 50 M – VIFMT50
₵171.00Add to cartDouble-coated fiberglass measuring tape, with an impact-resistant ABS plastic case. Contains a folding crank with fast rewind. It has a tape with millimeter graduations on both sides and a removable…
-
ANTI-SLIP TAPE 50MM X 15M – VIFA5015
₵171.00Add to cartAnti-slip tape with non-slip coating. It adapts to a very surface, is water, detergent, UV rays, light and temperature fluctuations resistant.
-
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
