-
×
18 X 300MM FLAT CHISEL WITH HAND GUARD - VITP12 QTY: 2 ₵72.00 -
×
IRON BAR BENDER 14X16MM (37840) - VICDF1416 QTY: 1 ₵189.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 44) - VIJCC44 QTY: 1 ₵335.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 38) - VIBG38 QTY: 4 ₵361.00 -
×
ANGLE GRINDER 2200W 230MM - VIRE23022A QTY: 1 ₵1,219.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 42) - VIJCC42 QTY: 1 ₵335.00
-
×
ANTI-SLIP TAPE 25MM X 15M - VIFA2515 QTY: 1 ₵92.00 -
×
ACRYLIC SILVER SPRAY - VISAPRA QTY: 1 ₵63.00 -
×
8-STEP ALUMINIUM STEP LADDER - VIEAC8 QTY: 1 ₵979.00 -
×
LARGE VOLTAGE TESTER - VIBPG QTY: 1 ₵32.00 -
×
8.50MM HSS TWIST DRILL BIT - VIHS8,5 QTY: 1 ₵40.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 40) - VIJCC40 QTY: 1 ₵335.00
-
×
COMBINATION RATCHET SPANNER 22MM - VICCR22 QTY: 1 ₵144.00 -
×
-
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
NITRILE-COATED GLOVE 6" - VILN6 QTY: 1 ₵12.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 1 ₵588.00 -
×
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) - VICCIPB4 QTY: 1 ₵139.00 -
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
COMBINATION RATCHET SPANNER 9MM - VICCR9 QTY: 1 ₵63.00
-
×
MANUAL PIPE THREADER FOR PVC PIPE - VITA34 QTY: 1 ₵132.00 -
×
VERNIER CALIPER, VITO BRAND, INSIDE PLASTIC CASE - VIPQ150 QTY: 1 ₵128.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 39) - VIBG39 QTY: 1 ₵361.00
-
×
CROBAR 100CM - VIP100 QTY: 1 ₵168.00 -
×
WOOD CHISEL MAX-PRO 30MM - VIFMXP30 QTY: 1 ₵107.00 -
×
63MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB63 QTY: 1 ₵38.00 -
×
PROFESSIONAL HACKSAW 550MM - VISC10222 QTY: 1 ₵184.00 -
×
COMBINATION RATCHET SPANNER 18MM - VICCR18 QTY: 1 ₵96.00
-
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 1 ₵89.00 -
×
CROBAR 80CM - VIP80 QTY: 1 ₵131.00
-
×
S1P SUEDE BOOT GENES (EU SIZE 41) - VIBG41 QTY: 1 ₵361.00
-
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 2 ₵149.00 -
×
HANDSAW WITH BI-MATERIAL HANDLE 450MM - VISCA450 QTY: 1 ₵127.00 -
×
50mm TCT SDS-PLUS CORE DRILL - VIBCP50 QTY: 1 ₵135.00 -
×
BALL PEIN HAMMER - VIB300 QTY: 1 ₵108.00 -
×
SELF RETRACTING UTILITY KNIFE 18MM SK5 BLADES - VIX18AA QTY: 1 ₵99.00 -
×
NAIL NO. 9 14MM - VIAP914 QTY: 1 ₵54.00 -
×
SET OF 12 COMBINATION RATCHET SPANNERS - VIJCCR12 QTY: 1 ₵537.00 -
×
BRASS BRISTLE BRUSH WITH SCRAPER AND HANDLE - VIEACR QTY: 1 ₵59.00 -
×
BATTERY 20V LI 4AH - VIBCBL204 QTY: 1 ₵651.00 -
×
BATTERY 20V LI 6AH - VIBCBL206 QTY: 1 ₵918.00 -
×
NITRILE-COATED GLOVE 7" - VILN7 QTY: 1 ₵12.00
-
×
PICK AXE 2,5KG W/ FIBER HANDLE - VIPC25 QTY: 1 ₵244.00 -
×
SMALL VOLTAGE TESTER - VIBPP QTY: 1 ₵23.00
-
×
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM - VIG80300 QTY: 1 ₵152.00
-
ADJUSTABLE WRENCH PRO 300MM – VICIP12
₵178.00Add to cartPro spanner, in chrome vanadium steel body.
-
PLASTERBOARD HANDSAW 500 MM – VISG500
₵177.00Add to cartPlaster hand saw with SK5 carbon steel blades, rubber-coated handle and 7 teeth per inch.
-
PRO ADJUSTABLE WRENCH WITH BIMATERIAL HANDLE 300MM – VICIBP12
₵177.00Add to cartPro wrench, made of chrome vanadium steel and bi-material handle.
-
MT LONG MEASURING TAPE 13 MM X 50 M – VIFMT50
₵171.00Add to cartDouble-coated fiberglass measuring tape, with an impact-resistant ABS plastic case. Contains a folding crank with fast rewind. It has a tape with millimeter graduations on both sides and a removable…
-
ANTI-SLIP TAPE 50MM X 15M – VIFA5015
₵171.00Add to cartAnti-slip tape with non-slip coating. It adapts to a very surface, is water, detergent, UV rays, light and temperature fluctuations resistant.
-
-
HANDSAW CUT-PRO 550MM – VISCP550
₵165.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE – VIMB1250
₵161.00Add to cartForged steel sledgehammer and bi-material handle.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X500MM – VIG80500
₵159.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
HANDSAW CUT-PRO 500MM – VISCP500
₵158.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
STILLSON-TYPE PIPE WRENCH 12″ – VICHST12
₵158.00Add to cartHead and body in chrome vanadium steel.
-
BALL PEIN HAMMER – VIB700
₵153.00Add to cartPolished claw hammer made of hardened steel, has a Genuine Hickory wood handle.
-
HANDSAW CUT-PRO 450MM – VISCP450
₵152.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 8 teeth per inch and angle markings of 45º up to 90º.
-
F-CLAMP WITH BIMATERIAL HANDLE 80X300MM – VIG80300
₵152.00Add to cartF-clamp with chrome-plated carbon steel body, rubber handle, rubber jaw protectors and adjustable opening by screw.
-
RIVETING PLIER – VIAREB
₵151.00Add to cartRiveting plier with hardened steel and aluminium body, rubber-coated handles and 4 nozzles: 2.4, 3.2, 4.0, 4.8 mm.
-
HANDSAW WITH BI-MATERIAL HANDLE 550MM – VISCA550
₵149.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
-
WATER PUMP PLIER 250MM – VIABA250
₵149.00Add to cartWater pump plier with chrome vanadium steel body and bi-material handle.
-
CLAW HAMMER LONG FIBER-RUBBER HANDLE 39CM – VIMCCL
₵148.00Add to cartFormwork hammer made of carbon steel, with a long fiberglass handle covered in rubber, which guarantees greater comfort of use. The magnetic cavity for nails brings practicality to the hammer,…
-
TAPE DISPENSER WITH 2 PACKING TAPES – VICJAF
₵145.00Add to cartApplicator set + packaging tapes. Equipped with brake. Continuous voltage control. Ergonomic and soft handle. Includes 2 rolls of transparent packing tape.
-
-
COMBINATION RATCHET SPANNER 22MM – VICCR22
₵144.00Add to cartChrome vanadium steel wrench/ring wrench and ratchet for quick tightening, with fine 72-tooth teeth.
-
TRY SQUARE 350MM – VIEC350
₵140.00Add to cartTry square with stainless steel blade. It is equipped with an aluminium handle, graduated in millimetres on both sides, with a 45º measuring angle.
-
SET OF 4 PCS SCREWDRIVER (ELECTRICIAN PRO) – VICCIPB4
₵139.00Add to cartSet of 4 Pro Insulated Wrenches with Chrome Vanadium Steel shaft, bi-material handle and magnetized tip.
-
HANDSAW WITH BI-MATERIAL HANDLE 500MM – VISCA500
₵138.00Add to cartHacksaw Cut Pro with SK5 carbon steel blades, rubber-coated handle, 7 teeth per inch and angle markings of 45º up to 90º.
