-
×
ACRYLIC SPRAY PAINT (PRIMER) - VISAPRI QTY: 1 ₵58.00 -
×
IRON BAR BENDER 14X16MM (37840) - VICDF1416 QTY: 1 ₵189.00 -
×
BENCH VICE - VITB125 QTY: 1 ₵980.00 -
×
ACRYLIC CHROME SPRAY - VISAC QTY: 1 ₵63.00 -
×
7.50MM HSS TWIST DRILL BIT - VIHS7,5 QTY: 1 ₵34.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
CROSS PEIN HAMMER - VIMP340 QTY: 1 ₵94.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 80X800MM - VIG80800 QTY: 1 ₵191.00 -
×
CLAW HAMMER 29MM - VIMC29 QTY: 1 ₵128.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 48) - VIJCC48 QTY: 1 ₵335.00 -
×
F-CLAMP WITH BIMATERIAL HANDLE 50X150MM - VIG50150 QTY: 1 ₵92.00
-
×
S1P SUEDE BOOT OXIS (EU SIZE 41) - VIBO41 QTY: 1 ₵439.00 -
×
SET OF 50 NUISANCE DUST MASKS - VIMH50 QTY: 1 ₵94.00 -
×
TRY SQUARE 300MM - VIEC300 QTY: 1 ₵132.00 -
×
TAILOR SHEARS 10" - 250MM - VITA10 QTY: 1 ₵239.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 44) - VIJCC44 QTY: 1 ₵335.00
-
×
SET OF 2 FILTERS A1P3 - VIF757A1P3 QTY: 1 ₵214.00 -
×
1/4" SNAP COUPLING WITH FEMALE THREADED JOINT - VIA459 QTY: 2 ₵89.00 -
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 40) - VIBO40 QTY: 1 ₵439.00
-
×
SQUARE SMOOTH CUT FILE 10" BLISTER - VILQM10 QTY: 1 ₵70.00
-
FLAT BASTARD CUT FILE 6″ BLISTER – VILCB6
₵40.00Add to cartFlat bastard file recommended for quick deburring of a wide variety of metals. Rubber-coated handle for greater comfort. Carbon steel body.
-
FLAT BASTARD CUT FILE 8″ BLISTER – VILCB8
₵49.00Add to cartFlat bastard file recommended for quick deburring of a wide variety of metals. Rubber-coated handle for greater comfort. Carbon steel body.
-
HAND SMOOTH CUT FILE 6″ BLISTER – VILPM6
₵49.00Add to cartHand smooth file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
HALF ROUND SMOOTH CUT FILE 6″ BLISTER – VILMCM6
₵58.00Add to cartHalf round smooth file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
SQUARE SMOOTH CUT FILE 6″ BLISTER – VILQM6
₵58.00Add to cartSquare bastard file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
HAND SMOOTH CUT FILE 8″ BLISTER – VILPM8
₵59.00Add to cartHand smooth file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
HAND SMOOTH CUT FILE 10″ BLISTER – VILPM10
₵60.00Add to cartHand smooth file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
ROUND WOOD RASP 8″ – VIGC8
₵64.00Add to cartRound wood rasp, suitable for thinning out wood on flat or concave surfaces. Rubber-coated handle for greater comfort. Carbon steel body.
-
SQUARE SMOOTH CUT FILE 8″ BLISTER – VILQM8
₵66.00Add to cartSquare bastard file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
FLAT BASTARD CUT FILE 10″ BLISTER – VILCB10
₵68.00Add to cartFlat bastard file recommended for quick deburring of a wide variety of metals. Rubber-coated handle for greater comfort. Carbon steel body.
-
SQUARE SMOOTH CUT FILE 10″ BLISTER – VILQM10
₵70.00Add to cartSquare bastard file, recommended for quick deburring of a wide variety of metals. Rubber coated handle for greater comfort. Carbon steel body.
-
ROUND WOOD RASP 10″ – VIGC10
₵76.00Add to cartRound wood rasp, suitable for thinning out wood on flat or concave surfaces. Rubber-coated handle for greater comfort. Carbon steel body.
