-
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
10.50MM HSS TWIST DRILL BIT - VIHS10,5 QTY: 3 ₵55.00 -
×
6/12V 7A BATTERY CHARGER - VICB10E QTY: 1 ₵607.00 -
×
CARPENTER PINCER 180MM - VITC180 QTY: 1 ₵76.00 -
×
BACK SAW CUT-PRO 300 MM - VISCCP300 QTY: 1 ₵128.00 -
×
WORKBENCH - VIBTR QTY: 1 ₵5,682.00 -
×
WORKING BIB PANTS COMFORT PLUS GREY (SIZE 44) - VIJCC44 QTY: 1 ₵335.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 44) - VIBO44 QTY: 1 ₵439.00 -
×
PRESS DRILL 500 W - VIMFC500A QTY: 1 ₵2,344.00 -
×
50MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB50 QTY: 2 ₵36.00 -
×
PADLOCK 70MM - VIAQ70 QTY: 2 ₵262.00 -
×
-
×
6-PIECE HOLE SAW SET - VIJ9SC QTY: 2 ₵491.00 -
×
S1P SUEDE BOOT OXIS (EU SIZE 43) - VIBO43 QTY: 1 ₵439.00
-
×
BACK SAW CUT-PRO 350 MM - VISCCP350 QTY: 1 ₵134.00
-
×
HAND PALLET TRUCK 3,0 T - VIPP30 QTY: 1 ₵6,458.00 -
×
POLISHER 1200W - VIP1200A QTY: 1 ₵838.00 -
×
18 X 300MM FLAT CHISEL WITH HAND GUARD - VITP12 QTY: 2 ₵72.00 -
×
1/4" LINEAR JOINT WITH MILLED NUTS - VIJD QTY: 2 ₵45.00 -
×
BENCH VICE - VITB125 QTY: 1 ₵980.00 -
×
WATER PUMP PLIER 250MM - VIABA250 QTY: 1 ₵149.00 -
×
80mm TCT SDS-PLUS CORE DRILL - VIBCP80 QTY: 1 ₵225.00 -
×
HANDSAW CUT-PRO 550MM - VISCP550 QTY: 1 ₵165.00 -
×
ACRYLIC SPRAY PAINT (PRIMER) - VISAPRI QTY: 1 ₵58.00 -
×
BOLT CUTTER PRO 24" - VICVP24 QTY: 1 ₵354.00 -
×
-
×
SWIVEL-HEAD RIVETING PLIER - VIARCR QTY: 2 ₵358.00 -
×
PLUNGE ROUTER 1200 W (8MM) - VIT1200 QTY: 1 ₵960.00 -
×
SHOE SPIRIT S1P Nº43 - VISSP43 QTY: 1 ₵826.00 -
×
BALL PEIN HAMMER - VIB500 QTY: 1 ₵123.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 44) - VIBG44 QTY: 1 ₵361.00 -
×
STAPLES FOR PNEUMATIC TOOL 16MM - VIAFP16 QTY: 1 ₵57.00 -
×
DEMOLITION HAMMER 1700 W - VIMD1700 QTY: 1 ₵3,782.00 -
×
CROBAR 50CM - VIP50 QTY: 2 ₵99.00 -
×
1/2" AIR RATCHET WRENCH - VICRP12 QTY: 1 ₵403.00 -
×
COMBINATION RATCHET SPANNER 13MM - VICCR13 QTY: 1 ₵72.00 -
×
125MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB125 QTY: 1 ₵45.00
-
×
DARK GLASS FOR HAND-HELD WELDING MASK - VIVMSE QTY: 1 ₵32.00 -
×
FLAT PAINT BRUSH 1/2" - VITJ12 QTY: 2 ₵23.00 -
×
60mm TCT SDS-PLUS CORE DRILL - VIBCP60 QTY: 1 ₵170.00
-
×
BRASS BRISTLE BRUSH WITH SCRAPER AND HANDLE - VIEACR QTY: 1 ₵59.00 -
×
SQUARE SMOOTH CUT FILE 8" BLISTER - VILQM8 QTY: 1 ₵66.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00
-
×
WOOD CHISEL MAX-PRO 22MM - VIFMXP22 QTY: 1 ₵95.00 -
×
PRESSURE PLIER PRO 175MM - VIAPP7 QTY: 2 ₵202.00 -
×
HIGH PRESSURE WASHER WR3 150B - VIML150WR3 QTY: 1 ₵3,313.00 -
×
GLUE GUN 10W - VIPCB10 QTY: 2 ₵65.00 -
×
S5 PVC SAFETY BOOT (SIZE 39) - VIBAS39 QTY: 1 ₵169.00 -
×
STANDARD AIR GUN QTY: 1 ₵68.00 -
×
SLEDGEHAMMER 5KG WITH WOODEN HANDLE - VIM5C QTY: 1 ₵420.00 -
×
SET OF 3 PARTICULATE RESPIRATORS FFP1 - VIC821P1 QTY: 1 ₵46.00 -
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00 -
×
AJUSTABLE HACKSAW FOR METAL 300MM - VISCFE QTY: 1 ₵55.00 -
×
BATTERY 20V LI 2AH - VIBCBL202 QTY: 1 ₵435.00 -
×
75MM SCRAPER WITH BIMATERIAL HANDLE - VIEFB75 QTY: 1 ₵39.00
-
×
STILLSON-TYPE PIPE WRENCH 12" - VICHST12 QTY: 1 ₵158.00 -
×
METAL GRINDING DISC 180 - VIRE180 QTY: 1 ₵43.00 -
×
ACRILIC RED SPRAY - VISAVM QTY: 1 ₵55.00 -
×
200A INVERTER WELDER - VII200B QTY: 1 ₵2,840.00 -
×
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP - VICSOS6 QTY: 1 ₵1,868.00 -
×
NAIL NO. 8 14MM - VIAP814 QTY: 1 ₵53.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00 -
×
WOOD CHISEL MAX-PRO 30MM - VIFMXP30 QTY: 1 ₵107.00
-
×
6X14MM SNAP COUPLING WITH RUBBER HOSE SLEEVE - VIA458 QTY: 1 ₵89.00 -
×
10 MTS SPIRAL AIR HOSE - VIME QTY: 1 ₵150.00 -
×
ANGLE GRINDER 1000W 125MM - VIRE12510A QTY: 1 ₵588.00 -
×
LARGE VOLTAGE TESTER - VIBPG QTY: 1 ₵32.00
60mm TCT SDS-PLUS CORE DRILL – VIBCP60
₵170.00
TCT SDS-Plus core drill bit indicated for use in stone, 30 mm diameter and 170 mm long.
- This core drill bit is used for drilling 30mm diameter holes in stone.
- It is teethed, which adapts to the combi drill.
- The centre of the drill has a centering bit that serves as a guide for the hole.
Available: 2 in stock
Related products
-
PRESS DRILL 500 W – VIMFC500A
₵2,344.00Add to cart500W drill press, has 5 speeds and an idle rotation speed of 500-2500rpm.
- Delivering 500W of power and having a maximum drill diameter of 13 mm, it has 5 speeds that allow between 500 and 2500 rpm.
- Robust and reliable, it has an adjustable table up to 40° which increases its versatility and efficiency.
-
200A INVERTER WELDER – VII200B
₵2,840.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 – 170A), (6.8 kVA/ 20-200A) and (7.8kVA /20-250A).
-
170A INVERTER WELDER – VII170
₵2,290.00Add to cartVITO’s Inverter Welders are available in four models with different powers and welding currents ranging from (4.3 kVA / 20-150A), (4.9 kVA/ 20 – 170A), (6.8 kVA/ 20-200A) and (7.8kVA /20-250A).
-
BELT SANDER 900W – VILR900
₵760.00Add to cart900W Belt sander which has a supply voltage of 230V 50Hz and a rotation speed of 120-380rpm.
- Ideal for sanding large surfaces, this sander gets great results thanks to its 900W power.
- Dust and chip collector, reducing waste and keeping the space and air cleaner.
- Possibility to connect to an external vacuum cleaner.
- Quick sanding sheet change system.
- Auxiliary handle adjustable in 3 positions, guaranteeing a high working comfort.
- On/Off switch lock.
-
PRESS DRILL 450 W – VIMFC450A
₵3,147.00Add to cart450W drill press, has 12 speeds and an idle rotation speed of 200-2700rpm.
- Delivering 450W of power and having a maximum drill diameter of 16 mm, it has 12 speeds that allow between 230 and 2470 rpm.
- Robust and reliable, it has an adjustable table up to 40° which increases its versatility and efficiency.
- Safety switch on the V-belt cover.
-
DEMOLITION HAMMER 1700 W – VIMD1700
₵3,782.00Add to cart1700W demolition hammer with an impact energy of 50J and an impact frequency of 0-2000ipm.
- Its aluminium body makes this machine more robust and therefore more durable.
- It has a window for checking the oil.
- High power, 1700W.
- Includes: SDS-Hex 18 x 390 mm flat chisel, SDS-Hex 390 mm pointed chisel, auxiliary handle, oil tube, pair of spare carbon brushes and carrying case.
