-
×
BENCH VICE - VITB125 QTY: 1 ₵980.00 -
×
UTILITY KNIFE 9MM SK5 BLADES - VIX9A QTY: 1 ₵135.00 -
×
IRON CUTTING DISC 125MM - VICF125 QTY: 1 ₵16.00 -
×
6/12V 7A BATTERY CHARGER - VICB10E QTY: 1 ₵607.00 -
×
S5 PVC SAFETY BOOT (SIZE 40) - VIBAS40 QTY: 1 ₵169.00 -
×
PROFESSIONAL HACKSAW 550MM - VISC10222 QTY: 1 ₵184.00 -
×
18 X 250MM POINT CHISEL WITH HAND GUARD - VIPP10 QTY: 1 ₵65.00 -
×
12.50MM HSS TWIST DRILL BIT - VIHS12,5 QTY: 1 ₵74.00 -
×
-
×
S5 PVC SAFETY BOOT (SIZE 39) - VIBAS39 QTY: 1 ₵169.00
-
×
COMBINATION PLIER 150MM - VIAU150 QTY: 1 ₵108.00 -
×
ACRYLIC SPRAY PAINT (PRIMER) - VISAPRI QTY: 1 ₵58.00 -
×
S5 PVC SAFETY BOOT (SIZE 44) - VIBAS44 QTY: 1 ₵169.00
-
×
PVC INSULATION TAPE (YELLOW-GREEN) - VIFI1920VA QTY: 2 ₵21.00 -
×
-
×
TRY SQUARE 350MM - VIEC350 QTY: 1 ₵140.00 -
×
CROBAR 40CM - VIP40 QTY: 1 ₵85.00 -
×
INTERNAL CIRCLIPS PLIER 150MM - VIAFI150 QTY: 1 ₵85.00 -
×
60mm TCT SDS-PLUS CORE DRILL - VIBCP60 QTY: 1 ₵170.00 -
×
6-PIECE HOLE SAW SET - VIJ9SC QTY: 1 ₵491.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 40) - VIBG40 QTY: 2 ₵361.00 -
×
18 X 300MM FLAT CHISEL WITH HAND GUARD - VITP12 QTY: 1 ₵72.00 -
×
HANDCART (PNEUMATIC WHEEL 85LTS) - VICA1 QTY: 1 ₵744.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 43) - VIBG43 QTY: 1 ₵361.00
-
×
NAIL FOR PNEUMATIC TOOL 20MM - VIPFP20 QTY: 1 ₵28.00 -
×
11.50MM HSS TWIST DRILL BIT - VIHS11,5 QTY: 1 ₵65.00
-
×
DRILLING HAMMER 1.25KG WITH BIMATERIAL HANDLE - VIMB1250 QTY: 1 ₵161.00 -
×
10.00MM HSS TWIST DRILL BIT - VIHS10 QTY: 1 ₵52.00
-
×
ANGLE GRINDER 2600W 230MM - VIRE23026 QTY: 2 ₵1,481.00 -
×
EARTH CLAMP 500A - VIAM500A QTY: 2 ₵65.00 -
×
HANDSAW CUT-PRO 550MM - VISCP550 QTY: 1 ₵165.00 -
×
FLAT PAINT BRUSH 1" - VITJ1 QTY: 1 ₵26.00 -
×
20V LI CORDLESS BRUSHLESS COMBI DRILL - VIBCBBSFL20 QTY: 1 ₵1,021.00 -
×
S1P SUEDE BOOT GENES (EU SIZE 44) - VIBG44 QTY: 1 ₵361.00
-
×
HAND PALLET TRUCK 2,5 T - VIPP25 QTY: 1 ₵4,477.00 -
×
7.50MM HSS TWIST DRILL BIT - VIHS7,5 QTY: 1 ₵34.00
-
×
BLADE FOR BUTCHER SAW - VIFST QTY: 1 ₵50.00 -
×
-
×
ELECTRONICS COMBINATION PLIER - VIAUE130 QTY: 1 ₵59.00 -
×
CUT OFF SAW 355 - 2300W - VISCF355 QTY: 1 ₵2,128.00 -
×
170A INVERTER WELDER - VII170 QTY: 1 ₵2,290.00
Related products
-
600W DRYWALL SCREWDRIVER – VIBEP
₵834.00Add to cart600W Drywall screwdriver with a no-load rotation speed of 0-2400rpm and maximum screw diameter of 6mm.
- 600 W of power, reversible direction of rotation, variable speed.
- It is an effective solution for plasterboard surfaces screws up to 6 mm.
- It combines robustness and reliability.
- Adjustable Screwdriving Depth
- On/Off switch locking button.
-
PRESS DRILL 450 W – VIMFC450A
₵3,147.00Add to cart450W drill press, has 12 speeds and an idle rotation speed of 200-2700rpm.
- Delivering 450W of power and having a maximum drill diameter of 16 mm, it has 12 speeds that allow between 230 and 2470 rpm.
- Robust and reliable, it has an adjustable table up to 40° which increases its versatility and efficiency.
- Safety switch on the V-belt cover.
-
PRESS DRILL 500 W – VIMFC500A
₵2,344.00Add to cart500W drill press, has 5 speeds and an idle rotation speed of 500-2500rpm.
- Delivering 500W of power and having a maximum drill diameter of 13 mm, it has 5 speeds that allow between 500 and 2500 rpm.
- Robust and reliable, it has an adjustable table up to 40° which increases its versatility and efficiency.
-
SILENT OIL-FREE AIR COMPRESSOR 6LT 8 BAR 0.7HP – VICSOS6
₵1,868.00Add to cartThis oil-free 8 bar compressor has a 6 litre tank and 8 bars of pressure. It stands out for its low noise level, allowing for more comfortable and quieter working.
- Low-noise, oil-free motor
- Quick-release fittings
- Corrugated filter
- On/off switch
- Thermal protection.
-
BRUSHLESS COMBI DRILL 20V + BMC CASE + CHARGER – VIBCBBBMCC
₵1,244.00Add to cart- LED light- Operation mode selector:
- 1. The drilling mode: Suitable for drilling work in metal and wood, plastic, PVC and others.
- 2. The impact drill mode: Suitable for drilling in concrete, stone and masonry.
- 3. The screwdriving mode: Suitable for screwing/loosening screws.
-
DEMOLITION HAMMER 1700 W – VIMD1700
₵3,782.00Add to cart1700W demolition hammer with an impact energy of 50J and an impact frequency of 0-2000ipm.
- Its aluminium body makes this machine more robust and therefore more durable.
- It has a window for checking the oil.
- High power, 1700W.
- Includes: SDS-Hex 18 x 390 mm flat chisel, SDS-Hex 390 mm pointed chisel, auxiliary handle, oil tube, pair of spare carbon brushes and carrying case.
